Table of Contents
Advertisement
Physical Description
NetVanta 6360 Rear Panel Design
The NetVanta 6360 rear panel is shown below along with a description of all connectors and interfaces.
VOICE
VOICE Connection
A single 50-pin female amphenol connector, labeled
analog FXS/FXO circuits. See
labeled
, is located on the front panel.
VOICE
Network Interfaces
The
T1/E1 0/1
and
T1/E1 0/2
network interface pinouts. The status LEDs are located on the right front panel.
Option Slot
The option slot accepts a variety of network modules (refer to
DC Power Connection
A DC input connector, labeled
Refer to
Supplying Power to the Unit on page 34
Grounding Point
A grounding point is provided to connect the unit to a protective earth ground. Refer to
Power to the Unit on page 34
Battery Backup Connection
An optional battery backup unit (P/N 1175044L1/L2) is available for use in case of power outages.
The battery backup unit connects to the
to
Optional Battery Backup Unit (P/N 1175044L1) on page 36
Power Connection
The rear panel has a power input to a universal 110 to 240 VAC power supply with an IEC connector,
labeled
. The appropriate three-prong cable is included in the shipment. Refer to
AC INPUT
AC Power to the Unit on page 34
connection details.
20
T1/E1 0/1
T1/E1 0/2
Figure 3. NetVanta 6360 Rear Panel Layout
Table A-1 on page 33
interfaces are RJ-48C pin connections. See
, is provided to power the unit from a -48 VDC power source.
DC IN
for connection details.
for connection details.
BBU
port, which also charges the unit during operation. Refer
or
Supplying Power to the Unit on page 34
Copyright © 2014 ADTRAN, Inc.
NetVanta 6360 Hardware Installation Guide
, provides the interconnect wiring for the
VOICE
for voice connector pinouts. The status LED,
Table A-4 on page 35
Option Modules on page
for connection details.
AC INPUT
RTN -48V
DC IN
BBU
for the
25).
Supplying
Supplying
as appropriated for
617006364F1-34A
Advertisement
Table of Contents
