Ce Declaration Of Conformity - Hanna Instruments HI 8510 Series Instruction Manual

CE DECLARATION OF CONFORMITY

We
Hanna Instruments Srl
V.le delle industrie 12
35010 Ronchi di Villafranca (PD)
ITALY
herewith certify that the process controllers
HI 8510E
HI 8710E
HI 8711E
HI 932500
have been tested and found to be in compliance with the following regulations:
IEC 801-2
IEC 801-3
IEC 801-4
EN 55022
Date of Issue: 29-03-1996
Recommendations for Users
Before using these products, make sure that they are entirely suitable for the
environment in which they are used.
Operation of these instruments in residential area could cause unacceptable
interferences to radio and TV equipments, requiring the operator to take all necessary
steps to correct interferences.
The trimmers are sensitive to electrostatic discharges. It is recommended to use
antistatic screwdrivers.
Any variation introduced by the user to the supplied equipment may degrade the
instruments' EMC performance.
To avoid electrical shock, do not use these instruments when voltages at the
measurement surface exceed 24VAC or 60VDC.
To avoid damages or burns, do not perform any measurement in microwave ovens.
DECLARATION OF CONFORMITY
HI 8510T HI 8512E
HI 8710T HI 8720E
HI 8711T HI 931500 HI 931501
Electrostatic Discharge
RF Radiated
Fast Transient
Radiated, Class B
66
HI 8512T
HI 8720T
D.Volpato - Engineering Manager
On behalf of
Hanna Instruments S.r.l.