Table of Contents
Advertisement
11.3 Programming the DECT parameters
On NeXspan C/S/L, menu 1.8.1.2 (Single-company management) or 1.9.1.2 (Multi-company
management) is used to program the DECT parameters:
The first four fields and the last two are described in the section DECT parameters to the page
164. The following parameters are specific to a multisite configuration and are used to define the
list of sites on which the mobile terminals will be registered:
•
SEARCH MOBILES NOT REGISTERED: fill in the field "OR IN THE LIST" with a broadcast
list (broadcast list A is the default).
Program the menu 3.7.2.5 with a list of the remote sites and centres.
DEFINITION OF BROADCAST LIST A
AMT/PTD/PBX/0020/2/4/EN
DECT PARAMETERS
PARI VALUE 0
RANDOM VAL RECORDED
RS VAL RECORDED
DIR. BEGINNING ASSIGNED TO PLL
SEARCH MOBILES NOT REGISTERED
IN THE LOCAL SITE
OR IN ANOTHER SITE
OR IN THE LOCAL CENTER
OR IN ANOTHER CENTER
OR IN THE LIST
CLOCK SYNCHRON.
CURRENT STATE
ITEM 1: CENTER NAME
OR SITE NAME
OR OTHER LIST
ITEM 2: CENTER NAME
OR SITE NAME
OR OTHER LIST
ITEM 3: CENTER NAME
OR SITE NAME
OR OTHER LIST
ITEM 4: CENTER NAME
SITE NAME
OR OTHER LIST
86........
66........
........
........
BROADCAST A
PRIORITY MASTER
TRANSMITTER NETWK CLK
01-CENTER 1
........
........
02-CENTER 2
........
03-CENTER 3
........
........
........
01/2007
999999999.
999.
NO
NO
........
........
........
Page 189
Advertisement
Table of Contents
