Table of Contents
Advertisement
10.4
Declare the radio zones
The MMC XSERVI is used to declare the radio zones.
The "Zone" field must be " .. " and routing "local site" for a single-site configuration. For multisite
configuration, a cluster routing must be created in all the sites containing DECT base stations.
Example: "Local center" or "all sites and centers".
Obj.=Dept.
Sub-object=RADIO ZONE
----------------------------- SERVICE ACCESS --------------------------
Template CCU=2.
Zone=..
----------------------------- SERVICE DATA --------------------------
1 : =Local center
2 : =---
3 : = ---
---------------------------------------------------------------------------
Report=O.K.
Operation performed
10.5
Declare the company/department profile
Association of a company profile using the MMC XACHMT: object COMPANY-SERVICE or using
the RESSOC tool (this requires a system reload).
In a real multi-company configuration, associate different profiles for each company-department
pair.
Object=CompDep route
-----------------------------------------------------------------------------
Company=0..
Route list for 1 CO access=0
Route list for 1 TL access=0
Company profile=0.
Page 180
SERVICES MANAGEMENT
TELEPHONE ROUTES
01/2007
Action=Display
Action=Display
Depart.=0..
AMT/PTD/PBX/0020/2/4/EN
Advertisement
Table of Contents
