Distribution Frame Wiring With Cable Hg4302B - Aastra NeXspan C Installation Manual

5.3.8 Distribution frame wiring with cable HG4302B

On the distribution frame end the cable has:
• 2 yellow terminal strips (8 transmission/reception interfaces),
• 1 red terminal strip (DECT synchronization ).
Note: On an FPHBG2/CSI device, the synchronization signal is sent via the loop and
transmitted to the LDT cards via the back plane (see Section 5.4).
RJ45
S0 / DECT
5 4 6
01 02 03
ED0 NED0 RD0
0G
(A02) (A03) (C02)
GRAY WHITE TRANSPARENT
ED4 NED4 RD4
1G
(B08) (B09) (C09)
GRAY BLUE TRANSPARENT
SYNP SYNN SYNAP
4G
RED BLUE RED
AMT/PTD/PBX/0020/2/4/EN
3
04 05 06 07
NRD0 ED1 NED1 RD1
(C03) (B03) (B04) (C04)
BLUE GRAY YELLOW TRANSPARENT
NRD4 ED5 NED5 RD5
(C10) (B10) (B11) (C11)
YELLOW GRAY BROWN TRANSPARENT
SYNAN SYNBP SYNBN
BLUE RED BLUE
Figure 5-14: Distribution frame wiring with cable HG4302B
01/2007
08 09 10 11
NRD1 ED2 NED2 RD2
(A04) (B05) (B06) (C05)
BROWN GRAY BLACK TRANSPARENT
NRD5 ED6 NED6 RD6
(C12) (A09) (A10) (A11)
BLACK GRAY RED TRANSPARENT
12 13 14 15
NRD2 ED3 NED3 RD3
(C06) (A06) (A07) (C07)
RED GRAY GREEN TRANSPARENT
NRD6 ED7 NED7 RD7
(A12) (A13) (A14) (C13)
GREEN ORANGE WHITE PURPLE
16
NRD3
(C08)
WHITE
NRD7
(C14)
BLUE
SHIELD
Page 111