Table of Contents
Advertisement
New features in M92x
Note:
For more detailed information on the use of an M92x mobile terminal, refer to
document [15] (see "Reference documents" on page 11).
The new features available in the M92x mobile terminal are:
•
new graphical display (new pictograms and new fonts)
•
extended directory: the mobile terminal's private local directory has been extended to contain
100 numbers (maximum of 18 characters per number) and the associated names (12
characters maximum), arrangement of names in alphabetical order and direct programming
possibility from the inbound call log or from the outbound call log.
•
search and call by name in the extended directory using the alphanumeric keypad, with
search and speed call possibility.
•
inbound call log: maximum of 30 calls, comprising for each name (12 characters maximum),
the number (18 calls maximum), time stamping (date/time) and status (not answered, not
consulted, answered, consulted, called back).
•
outbound call log: maximum of 10 call records comprising for each name (12 characters
maximum), the number (18 calls maximum) and time stamping (date/time).
•
Additional features:
•
quick memories: allows quick access to 9 predefined memories, each belonging to the
extended private directory. The principle is to associate an extended directory memory to
each key on the keypad (1 to 9). To quickly start a call from any of these memories, just press
and hold down the corresponding key until the associated name is displayed, then activate
the "Call" command to start dialing (a new assignment deletes a previous assignment).
•
"ringer off " shortcut: only with the set idle, quick activation/deactivation of the mobile's ringer
by pressing and holding down the 0 key on the keypad. Possibility to activate/deactivate the
ringer via the "Personalize / Ring volume" menu.
•
masking of the "Declare" menu: the "Declare" menu used to declare or cancel a mobile's
programming on the PBX only becomes accessible when a special installer code is entered:
Menu 9995. It no longer appears in the "Personalize" menu.
•
mobile terminal access code:
•
for activating/deactivating the optional protection via the installer menu - Menu 9993
•
prompt to enter an access code each time the mobile terminal is put back to service (after
the mobile has been switched off or the battery has been disconnected, then
re-connected),
•
personalization of the access code (4 digits, 0000 by default),
•
in the event of loss of personalized code, installer unlocking code (*#*#), with return to the
default code "0000".
•
Deactivation modes:
•
by pressing rapidly the C key and "Off"
•
by pressing and holding down the C key.
Note: In these modes, only the icon "battery charge level" flashes when the handset is placed
on its charger.
Page 46
01/2007
AMT/PTD/PBX/0020/2/4/EN
Advertisement
Table of Contents
