Table of Contents
Advertisement
Chapter 9 - Programming for the NeXspan
9.1
Introduction
The steps for programming the DECT service are described for NeXspan C/S/L/D PBXs.
Note: It is essential to follow the programming order given.
1
PRELIMINARY OPERATIONS:
•
Check the "internal" type data routing (menu 2.5 "Data management/Routes")
2
MANAGING TOPOLOGY
Declare the cells
Declare the DECT parameters
3
MANAGING RESOURCES
Name the trunk groups.
Define a trunk group.
4
PUTTING THE DECT SYSTEM IN SERVICE
Delete S0 subscribers.
Put the DECT interface cards in service.
Put the DECT base stations in service (downloading).
5
CHECKING THE PROGRAMMING PARAMETERS
Display the base stations.
Display the coverage.
6
REGISTERING AND PUTTING IN SERVICE THE MOBILES
7
MANAGING REGISTRATION PASSWORDS
AMT/PTD/PBX/0020/2/4/EN
01/2007
C/S/L/D range
Page 163
Advertisement
Table of Contents
