Step 4: Connect The Inputs And Outputs; Step 5: Connect The Power; Step 6: Technical Specifications - Kramer PT-871xr Quick Start Manual

Step 4: Connect the inputs and outputs

Always switch OFF the power on each device before connecting it to your PT-871xr.
To achieve specified extension distances, use the recommended Kramer cables to connect AV equipment to the
www.kramerav.com/product/PT-871xr).
Using third-party cables may cause damage!

Step 5: Connect the power

Connect the 12V power adapter to the
counterpart via DGKat 2.0. Each device can provide or accept power over cable (PoC) via DGKat 2.0.
Safety Instructions (See www.kramerav.com
Caution:
• For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.
• There are no operator serviceable parts inside the unit.
Warning:
• Use only the power cord that is supplied with the unit.
• Disconnect the power and unplug the unit from the wall before installing.

Step 6: Technical Specifications

Inputs
Outputs
Video
Reach Extension
Controls
Power
Environmental Conditions
Regulatory Compliance
Enclosure
Accessories
Specifications are subject to change without notice at
PT-871xr and plug it into the mains electricity. This device provides power to its
for updated safety information)
1 HDMI
1 DGKAT 2.0
Transmitted Data Bandwidth Up to 18Gbps (6Gbps per graphic channel)
Max Resolution
Compliance
Standard Compression
Level
High Compression Level
Front Panel
Rear Panel
Consumption
Source
Operating Temperature
Storage Temperature
Humidity
Safety
Environmental
Size
Type
Cooling
Included
www.kramerav.com
On a female HDMI connector
On a female RJ-45 connector
3840x2160@60Hz (4:4:4) 24bpp at high compression level
4096x2160@60Hz (4:4:4) 24bpp at standard compression level
HDMI 2.0, HDCP 2.2, HDR 10
Up to 40m (130ft) at 4K@60Hz (4:4:4)
Up to 70m (230ft) at 4K@60Hz (4:2:0) or full HD (1080p @60Hz 36bpp)
Up to 60m (200ft) at 4K@60Hz (4:4:4)
Up to 70m (230ft) at 4K@60Hz (4:2:0) or full HD (1080p @60Hz 36bpp)
IN, OUT and ON LEDs
DIP-switches
12V DC, 600mA
12V DC, 2A
0° to +40°C (32° to 104°F)
-40° to +70°C (-40° to 158°F)
10% to 90%, RHL non-condensing
CE, UL
RoHs, WEEE
Pico Tool
Aluminum
Convection Ventilation
1 Power adapter, 1 power cord
PT-871xr (available at