Table of Contents
Advertisement
Forced defrost
Overview field settings
Export MMI settings
EWAA011~016DA + EWYA009~016DA
Packaged air-cooled water chillers
and packaged air to water heat pumps
4P620242-1 – 2020.06
#
Code
[9.F]
[E‑08]
Forced defrost
Manually start a defrost operation.
#
Code
[9.H]
N/A
NOTICE
Forced defrost start-up. You can only start forced defrost when the heating
operation has been running for a while.
All settings can be done using the menu structure. If for any reason it is required to
change a setting using the overview settings, then the overview settings can be
accessed in the field settings overview [9.I]. See
4
setting" [
107].
About exporting the configuration settings
Export the configuration settings of the unit to a USB memory stick, via the MMI
(the user interface delivered as accessory). When troubleshooting, these settings
can be provided to our Service department.
#
Code
[9.N]
N/A
To export MMI settings
1 Insert a USB memory stick in the user interface.
2 On the user interface, go to [9.N] Export MMI settings.
Description
Power saving function for compressor
module:
▪
0: No
▪
1: Yes
Description
Do you want to start a defrost operation?
▪
Back
▪
OK
"To modify an overview
Description
Your MMI settings will be exported
to the connected storage device:
▪
Back
▪
OK
11
Configuration
|
—
Installer reference guide
179
Advertisement
Table of Contents
