TL3700 Series
Designer Trim
Installation Instructions
2
Full Dummy Trim (TL3770) & Half Dummy Trim (TL3750) Installation (cont .)
b
Install Adapter Plate Assemblies (TL3770)
Note
Make sure dummy adapter plate is installed on non-trim side of door.
c
Install Adapter Plate Assemblies (TL3750)
Note
Make sure dummy adapter plate is installed on non-trim side of door .
d
Install Collar (TL3770)
Install collar on both sides of door using supplied rubber grip.
• Make sure collar is tight up against door.
e
Install Collar (TL3750)
Install collar on trim side of door.
• Make sure collar is tight up against door.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2011, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Figure 14
Figure 15
8
Figure 16
Figure 17
FM341 07/19