Advertisement
5. Disconnect the red, green, and blue mini-SAS harnesses from the card cage through the
projector service access door.
6. Disconnect the three harnesses (J5, J7, J87) from the SSCB on top of the card cage.
7. Disconnect the two harnesses (J17, J18) from the backplane board.
8. Loosen the four captive screws securing the card cage.
Upgrading the Color Sensor Board Instruction Sheet
020-103100-01 Rev. 1 (06-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Upgrading the color sensor board
5
Advertisement
