Christie D4K40-RGB Replacement Instructions Manual page 8

N
14. Disconnect the laser optical subsystem (LOS) harnessing shown on callout N.
The photographs above show the side view of the bracket in the left photo, and the front view
on the right.
15. Remove the rear left bottom cover mounting bracket.
Do not remove the coupling elbow within the rear IOS. The pins on the bottom of the coupling
elbow are required for LOS realignment later in the installation procedure.
4K-RGB Laser Optical Subsystem Replacement Instruction Sheet
020-103107-02 Rev. 1 (07-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
4K-RGB Laser Optical Subsystem Replacement Instructions
8