2N Lift8 User Manual page 166

Select Reset to factory defaults to delete all user edited changes and restart the audio unit with the
factory default values. Select this option and click Upgrade to reset factory default values upon
upgrade. This action will only be performed together with new FW, Bootloader or Voice menu loading.
To reset the default values only, use the Configuration menu.
Caution
If you select
not be deleted for security reasons.
Licences
The Licences menu is used for adding licence files. The licences to be added to the
applicable in the UMTS/GSM module versions. The licence enables/disables the network (provider) to
which the device shall log in. Enter the IMSI code into the licence: particularly the MCC and MNC to
define the country and provider permitted for the
specify the SIM cards to be used in one network. You can add up to 10 IMSI codes to the licence.
®
Contact your 2N Lift8
for the licence file.
Having acquired the licence file, click Open from file and Load to device to open a file browser with
the licence location and click Confirm. The program will notify you of the licence change and
necessary device restart. Confirm your selection. Re-log in and check the licence. The Allowed IMSI
item will display the IMSI codes permitted by the new licence.
Figure: Device / Upgrade Menu
Reset to factory defaults
supplier or the manufacturer's Technical Support department (
, parameters 1100 ~ 1110 (VOIP settings) will
CU . Enter a greater portion of the IMSI code to
CU are only
sales@2n.cz )