Logs - Advanced Settings - 2N Lift8 User Manual

Save the captured log for later analysis in the left-hand bottom part. Click Find to find a message in
the log. Enter the string to be searched in the dialogue window. Click Filter to find the first
occurrence and Find next to find the next occurrence. Use Advanced settings to enable/disable
message types and assign colours for easier log displaying and other advanced options. See below
for details.
Tip
The logs should only be analysed by duly trained persons or your Technical Support
department.
Logs – Advanced Settings
Logs – Advanced settings
colours table helps you set specific background colours for the selected messages. Select the
specific colours checkbox to activate the user background colour settings for the log groups located
below. The change will occur immediately after check-off.
size. Moreover, you can configure the
define a format of your own (dd.MM.yyyy HH.mm.ss.fff). Not all values have to be completed, you
can also arrange them as you wish respecting the general Custom Date and Time Format Strings
rules (see here for details, e.g.).
minutes a tick off Autoscroll to display the latest log row all the time.
Figure:
is displayed to the right in a hideable form. The
Time format
Auto refresh logs
Logs Menu
Text
: either use the system date/time format or
is the last option. Set the Refresh rate in
Group background
helps you modify the text
Use