avertX AVX-HD848IRM Quick Start Manual

CABLE CONNECTIONS
1
2
3
1 RJ-45 1 RJ-45
2 2 DC12V DC12V
3 3 Audio I/O Audio I/O
MICRO SD CARD AND RESET BUTTON
1
To restore the camera to factory defaults: To restore the camera to factory defaults:
1. Disconnect power for 30 seconds.
1 1 Reset Button Reset Button
2. Reconnect power and wait 30 seconds.
3. Press and hold the reset button for 20 seconds.
Supports up to 512GB microSD card for Edge storage. Supports up to 512GB microSD card for Edge storage.
2 2 MicroSD Card Slot MicroSD Card Slot Do not add or remove the microSD card when the camera is Do not add or remove the microSD card when the camera is
powered on. powered on.
CONTACT OUR
PHONE: 855-228-3789 EMAIL: support@avertx.com
Data Connection Data Connection
Power Connection Power Connection
Ground Ground
Audio In Audio In
Audio Out Audio Out
2
PRO TEAM
CHAT: https://help.avertx.com/
AVX-HD848IRM | QUICK START GUIDE
4K INDOOR/OUTDOOR IP DOME
WITH SMART ANALYTICS
HD848IRM QUICK START GUIDE
This is a quick reference for users to install and operate the HD848IRM
camera. It provides only basic information regarding camera installation,
setup, and operation. For further details, please download the HD848IRM
User Manual at www.avertx.com.
PACKAGE CONTENTS
HD848IRM Camera Mounting Template
T20 Torx Tool Paintable Dome
SET THE DEFAULT
CAMERA PASSWORD
Scan the QR code or follow the
link below to learn how to change
the default camera passwords
used on initial setup.
avertx.com/default-camera-
Quick Start Guide Screws & Anchors
Waterproof Cable
Cover
Connector
37716AA