Thermo Scientific invitrogen EVOS M5000 Manual page 52

Run a saved time
lapse routine
50
Each time you run a Time Lapse routine, the system saves the specifics of the
routine, which you can then recall and run with a new sample.
1. On the Capture tab, click Automate, then select Time Lapse to open the Time
Lapse tool.
2. Click Load File to open the Choose Routine dialog.
3. Select the routine you want to run, then click Open.
4. If needed, make changes to the routine as described for new routines.
5. Click Start to run the Time Lapse routine.
EVOS M5000 Imaging System User Guide
™