Thermo Scientific invitrogen EVOS M5000 Manual page 23

Optional
: Configure
display settings
Find the region of
interest
EVOS M5000 Imaging System User Guide
™
1. Hover the pointer over the Viewing area to reveal the buttons for Display
Settings and Analysis Tools.
2. Click Image Display Settings button to expand the controls for image
display settings for the selected channel.
3. Adjust Brightness
sliders.
4. Click the Reset button
5. Click the Image Display Settings button again to collapse the controls.
1. Use the X-axis and Y-axis positioning knobs (page 7) to move the sample stage
and bring the region of interest into the field of view.
2. To zoom in and out of the Viewing area,
use the Zoom slider. The zoom range is
100% to 1000%.
3. If needed, readjust the brightness and focus, then proceed to capture the image.
Note: If desired, enable Quick Save (page 41) before proceeding to image capture.
Quick Save function allows you to set the save options in advance and save your
captured images with a single click directly from the Capture tab or automatically
after each capture.
, Contrast , and Gamma
to return the display settings to their default values.
using the corresponding
21