Table of Contents
Advertisement
Operating instructions
FSZ-M
3.3 One-Man Operation
Pos : 21 /06 Bedi enung/06 Bedi enung u. Ei nstellungen/Bedienung/Ger äte mit Wec hs elautomati k @ 0\mod138_2.doc x @ 5537 @ @ 1
●
The device is connected to the lifting equipment/support frame (e.g. excavator).
●
Before lifting the device, the gripping range has to be adjusted.
●
The device is placed over the product, set down, the device closes round the product and it can be lifted.
●
Set down on the ground again, the device opens automatically, the automatic release locks it into position so
that the device can be lifted without closing up.
●
Placed over the next product, the automatic release disengages itself and the product can be lifted.
●
The device therefore is a ONE-MAN-MACHINE.
Shut-down the device without lifting equipment/support frame only on even ground. The
gripping arms must be opened enough, to ensure a secure standing of the device.
Otherwise exists danger of overturning!
Pos : 22 /06 Bedi enung/06 Bedi enung u. Ei nstellungen/Wechs el automati k-D arstell ung (N eue Version) @ 0\mod352_2.doc x @ 5663 @ @ 1
The device is mounted with a automatic release, that means the opening and closing of the gripping arms results
through the set down and lifting of the device.
Pictures the positions of the automatic release
●
Device is lifted through the
support frame.
●
Gripping arms are opened.
●
Device is set down with the
gripping good (on the ground).
●
Gripping arms are opened.
Pos : 23 /=============================== @ 0\mod8_2.doc x @ 5159 @ @ 1
12 / 15
Contents
●
Device is set up on the gripping
good.
●
Gripping arms are opened.
/
●
Device is lifted through the
support frame.
●
Gripping arms are opened.
(laydown position of the device
on the ground)
V3
●
Device is lifted through the
support frame.
●
Gripping good is clamped and can
be transported to the destination.
DE
Advertisement
Table of Contents
Need help?
Do you have a question about the FSZ-M and is the answer not in the manual?
Questions and answers