Operating instructions
FSZ-M
Pos : 12.8 /04 Sic her heitsbesti mmung en/03 U nfallschutz/Ü _Unfallsc hutz @ 0\mod33_2.doc x @ 6689 @ @ 1
1.7
Accident prevention
●
The workplace has to be covered for unauthorized persons, especially children.
●
Take care in case of thunderstorm!
●
The workplace has to be sufficiently illuminated.
●
Take care with handling wet, dirty and not solidified components.
●
The working with the device in case of atmospheric editions under 3° C (37,5° F) is forbidden!
Because the goods could be fall down caused by dampness or freezing.
Pos : 12.10 /04 Sicherheits besti mmungen/04 F unktions-und Sichtpr üfung/Ü _Funktions- und Sichtpr üfung @ 0\mod100_2.doc x @ 6717 @ @ 1
1.8
Function Control
Pos : 12.11 /04 Sicherheits besti mmungen/04 F unktions-und Sichtpr üfung/F unktions- und Sic htprüfung (MECH ANIK) @ 0\mod34_2.doc x @ 6773 @ @ 1
1.8.1
General
●
Before using the device check the functions and the working condition.
●
Maintenance and lubrication are only permitted when device is shut down!
●
Do not use the device, until all faults which can cause safety hazards are removed.
●
If there are any cracks, splits or damaged parts on any parts of the device, immediately stop using it.
●
The operating instructions must be available at the workplace every time.
●
Do not remove the data-plates of the machine.
●
Unrecognisable information signs must be replaced.
8 / 15
Contents
V3
DE