Complete Meter Configuration - Seametrics INW Manual

Complete Meter Configuration

The meter is controlled via four buttons on the front of the meter face. Though your
meter comes preconfigured, if it should ever need to be completely reset, follow the
instructions below:
Complete Reset
(Continued on next page.)
Seametrics • 253.872.0284
PANEL METER FOR INW PT12 SENSOR
To change a value on
the meter, use the
select the digit you want
to change. Use the
cycle through acceptable
values.
Page 14
to
NOTE: With firmware version
0.13 and higher you can also
read from registers:
462593 for pressure
462595 for temperature
462597 for voltage
to
inwusa.com