Advertisement
Quick Links
Advertisement
Related Manuals for Intelbras XAS Smart
Summary of Contents for Intelbras XAS Smart
- Page 1 User manual XAS Smart XAS Smart Black...
- Page 2 Congratulations, you have just purchased a product with Intelbras quality and safety. The XAS Smart/XAS Smart Black wireless aperture sensor was developed by Intel- bras with 100% digital technology. The sensor is mounted on SMD components and can be installed in most products that work at the same frequency and mo- dulation available on the market.
- Page 3 Take all necessary precautions for the safety and security of your property. » To protect a door or window, it is recommended to use only one XAS Smart / XAS Smart Black sensor, thus making the installation more economical and freer of interference during the transmission of the signal.
-
Page 4: Table Of Contents
Summary 1. Technical specifications 2. Characteristics 3. Modulation configuration 4. Installation 5. Configuration 6. Approval Warranty... -
Page 5: Technical Specifications
» Transmission frequency 433.92 MHz 3. Modulation configuration The XAS Smart / XAS Smart Black sensor leaves the factory with the OOK modula- tion. To change the modulation from OOK to FSK, simply remove the battery from the sensor, open the OOK/FSK jumper indicated on the board (figure A) and then return the battery to its original position. -
Page 6: Installation
battery to the original position. Once this is done, the sensor will resume operation in OOK mode. Figure A 4. Installation Open the sensor by removing the rear cover and place the battery, then choose the lo- cation where the sensor will be installed. Once chosen, use double-sided tape or screws for its fixation. - Page 7 The sensor must be positioned according to figures 2 and 3, with the magnet aligned with the sensor body and with the minimum distance between them possi- ble, so that the magnet is in contact with the magnetic field sensor. Note: For the closing and opening of the magnetic field sensor, some average distances must be respec- ted.
-
Page 8: Configuration
Low battery sensor: the XAS Smart / XAS Smart Black has a battery level meter, the voltage is less than 2.55 volts, it will send the information to the center and its LED will flash quickly in the opening indicating a low level of battery of the sensor. -
Page 9: Warranty
Warranty It is expressly stated that this contractual guarantee is granted under the following conditions: Customer name: Customer signature: Invoice No.: Purchase Date: Model: Serial No.: Reseller: 1. All parts, pieces and components of the product are guaranteed against any ma- nufacturing defects, which may present, for a period of 1 (one) year, with this period covering 3 (three) months of legal warranty plus 9 (nine) months of con- tractual warranty - counted from the date of purchase of the product by the Con-... - Page 10 Consumer perform a regular backup of the data contained in the product. 7. Intelbras is not responsible for the installation of this product, and also for any at- tempts at fraud and/or sabotage in its products. Keep the updates of the software and applications used up to date, if applicable, as well as the network protections necessary to protect against hacking.
- Page 11 Support via e-mail: suporte@intelbras.com.br Customer Service: 0800 7042767 Where to buy? Who installs it? 0800 7245115 Produced by: Intelbras S/A – Indústria de Telecomunicação Eletrônica Brasileira Rodovia BR 459, km 124, 1325 – Distrito Industrial – Santa Rita do Sapucaí/MG – 37540-000 01.20 CNPJ 82.901.000/0016-03 –...
Need help?
Do you have a question about the XAS Smart and is the answer not in the manual?
Questions and answers