Table of Contents
Advertisement
Appendix 9
In the default setting of a code reader, the IP address is automatically set using DHCP server. This section explains the
procedure for changing the setting of the code reader in which a static IP address has already been set to the setting whose
the IP address is automatically set using DHCP.
Start SetupTool.
Ò
Click [Repair & Support] on the left side of the SetupTool screen and select a code reader icon displayed under the
"Network" section.
After the setting status of the code reader IP address is displayed on the right side of the screen, check that "Use Static IP
Address" is selected.
Select "Use DHCP Server."
Click the [Apply] button.
Wait for the code reader to be restarted and the IP address to be changed. (Time required: 30 sec)
The IP address is automatically set after starting the code reader.
Setting an IP Address to a Code Reader
(DHCP)
Ò
Ô
Õ
Ó
Appendix 9 Setting an IP Address to a Code Reader (DHCP)
A
APPX
93
Advertisement
Table of Contents
