Table of Contents
Advertisement
6.9
Screen Layout Customization (3)
Displaying 'Image Panel' and 'Code Quality' side by side
Click the [View] tab on the screen and check that 'Image Panel' and 'Result History' are turned ON.
6
Ò
When holding a mouse being clicked on the [Code Quality] tab under the 'Image Panel,' a cross cursor appears.
Arrange the tab to a desired position by following the same procedure as Section 6.8 Displaying 'Image Panel' and 'Result
History' side by side.
When 'Code Quality' has already been displayed on the screen, the procedure will be the same as Section 6.8 Displaying
'Image Panel' and 'Result History' side by side.
'Pin mark' and '' on 'Image Panel,' 'Result History,' and 'Code Quality'
Ó
Ò
The collapsed part is displayed by selecting the part at the right-most side of the screen ('Result History' in the example
above).
By clicking the 'pin mark' to switch the direction of the mark from horizontal to vertical, the window is fixed and always
displayed without collapsing to the side. By clicking the mark again to switch its direction from vertical to horizontal, the
window is collapsed to the side.
Ô
6 SetupTool SCREEN
33
6.9 Screen Layout Customization (3)
Advertisement
Table of Contents
