Table of Contents
Advertisement
6.6
Result History
Result History displays reading result information such as read codes and reading time.
For the display of Result History, refer to 'View' in 'Section 6.4 Menu Tabs and Operation Icons.'
(1)
(2) (3) (4) (5)
(1) Clear: To clear result histories.
(2) Pause ↔ Play: When pausing, it stops to display information in Result History even if codes are read.
(3) Copy: The selected contents of a result history can be pasted on other applications.
(4) Copy All: The whole result history can be pasted on other applications.
(5) Customize: To select items to be displayed in Result History.
(6) Filter: To filter the results being displayed.
(7) Enable Beeper on Good Read: This function cannot be used at this point.
(8) Logging: To perform and set logging and reporting.
The item to display in Result History can be selected from 'Customize' on the upper part of the Result History.
Result: A content that is output by a code reader. It is basically a read code.
Result Status: A result indicating whether reading is successful or failed.
Arrival Time: A record of time when a reading result is arrived in a personal computer.
Decode Time: Analysis time of the acquired image data. It is basically a reading process time.
Trigger Time: Time required from when a trigger signal is received to when the reading is completed.
Symbology: A type of a read code.
Read Setup: A read setup number which is used when the reading is successful.
Module Size: An average pixel number of a read code module (Thin lines for 1-D code, one module for 2-D code). The value
is the same as PPM (Pixels Per Module).
When selecting a result history, the state when the code is read is displayed in 'Image Panel.'
6 SetupTool SCREEN
30
6.6 Result History
(6)
(7)
(8)
Advertisement
Table of Contents
