Mitsubishi Electric Melsensor FA-CF26-SR Settings Manual page 39

By enabling "Enable Beeper on Good Read" in [Inputs/Outputs] of [Application Steps], a beep sound is generated when a
code is recognized during tuning.
Reading test
By clicking the [Test] button, an image is decoded according to the parameters set by tuning results.
The decoding status of the following items can be checked at a reading test.
• Current Read Rate: A success rate of decoding from the latest 20 times.
• Decode Time [ms]: Decode processing time (* excluding image acquisition time)
• Min/Max Decode Time: The minimum and maximum decode time displayed on a graph in the "Read Performance" pane.
• Found Symbologies: Types of detected symbols
• Read Strings: Information read from a code
7 SETTING CODE READER
7.2 Settings in Tune
7
37