Restore - Mitsubishi Electric Melsensor FA-CF26-SR Settings Manual

9.2

Restore

This is a function to restore a code reader using a backup file.
Precautions
In the following cases, the [Restore] button is grayed out and the button cannot be clicked.
• A conformed IP address is not set.
• The code reader is connected with SetupTool.
• A valid configuration source is not specified.
The restoring procedure is shown as below.
Ò
Ó
 Select the [Home] tab.
 Click [Restore].
 Select a code reader to restore.
 Select 'Configuration File' from the "Configuration Source" section, and click the file specification button on the right side of
the item.
Õ
Ô
9 HOME TAB FUNCTIONS
9.2 Restore
9
69