Panasonic CS-Z20XKEW Service Manual page 152

19.1.6 To Remove NanoeX
1. Remove discharge Grille.
19.1.7 To Replace Wireless LAN Module (Network Adapter)
1 Remove the front grille (refer how to take out front grille) from the unit.
2 Remove the indicator piece by releasing the hook.
3 Remove 1 mounting screw, then remove the network adaptor holder.
4 After that, network adaptor can be easily replaced.
2
Reminder: Serviceman or owner must setting again Panasonic Comfort Cloud app after replace Wireless LAN
Module.
Indicator
piece
Hook
6. Remove Fan Motor.
Reminder: To reinstall the fan motor, adjust
the fan motor connector to 60° towards you
before fixing control board.
Figure 18
3. Unscrew NanoeX complete.
Then remove NanoeX complete.
Figure 19
3
Network adaptor
holder
Screw
152
2. Remove CN-NANO
from main electronic
controller.
4