Indication Panel; Nanoe Tmx Operation - Panasonic CS-Z20XKEW Service Manual

14.11 Indication Panel

LED
Color
Light ON Operation ON
Light OFF Operation OFF Timer Setting OFF nanoe OFF
Note:

If POWER LED is blinking, the possible operation of the unit are Hot Start, during Deice operation, operation
mode judgment, or ON timer sampling.

If Timer LED is blinking, there is an abnormality operation occurs.
TM
14.12 nanoe X Operation
TM

Generate nanoe
TM

nanoe X operation start condition
During unit running at any operation mode, if nanoe
o
(operation mode + nanoe
During unit is OFF, if nanoe
o
TM

nanoe X operation stop condition
When OFF/ON button is pressed to stop the operation.
o
TM
When nanoe
o
When OFF Timer activates.
o
TM

nanoe X operation pause condition
When indoor fan stop (during deice, odor cut control, thermostat off, etc.). nanoe
o
indoor fan restarts.
When indoor intake temperature ≥ 35°C and ≤ 5°C. nanoe
o
temperature < 35°C or ≥ 5°C continuously for 6 minutes.

Indoor fan control
During any operation mode combines with nanoe
o
mode. However, nanoe
distribution, nanoe
TM
During nanoe
o
TM
nanoe X individual operation is cooling medium fan. Powerful & Quiet is disabled during nanoe

Airflow direction control
During any operation mode combines with nanoe
o
mode.
TM
During nanoe
o

Timer control
When ON Timer activates when unit stops, previous operation resumes and restored last saved nanoe
o
operation status.
When ON Timer activates during any operation, no change on current operation.
o
When OFF Timer activates during any operation, all operation stops and the latest nanoe
o
status is saved.

Indicator
TM
When nanoe
o

Remote control receiving sound
Normal Operation
o
TM
nanoe X Operation
o
Stop
o
TM
nanoe X individual Operation  Stop
o
POWER TIMER
White White
Timer Setting ON
X (water wrapped ion particle) to moisturize skin, provide deodorization & sterilization effect.
TM
X operation) starts.
TM
X operation is activated, nanoe
X button is pressed.
TM
X system enabled when fan speed ≥ 360 rpm to ensure proper negative ion
TM
X system disabled when fan speed < 360 rpm.
X individual operation, fan speed follow remote control setting. Auto Fan Speed for
X individual operation, Air Swing follow remote control setting.
TM
X starts, nanoe X indicator ON.
 nanoe
 Normal Operation
 nanoe
nanoe X
White White
Wireless LAN Mode
nanoe ON
ON
Wireless LAN Mode
OFF
TM
X operation is activated, combination operation
TM
X individual operation starts.
TM
X operation resume after indoor intake
TM
X operation, fan speed follows respective operation
TM
X operation, airflow direction follows respective operation
TM
X Operation
TM
X individual Operation
89
TM
X operation resume after
TM
X.
TM
X operation
: Beep
: Beep
: Beep
: Long Beep
TM
X