Panasonic CS-Z20XKEW Service Manual page 107

Press TEMP increment or decrement button to choose No. 12.
o
Press Timer increment or decrement button to select desired temperature low limit of set temperature for
o
AUTO mode.
Press Timer Set button to confirm low limit selection.
o
Press TEMP increment or decrement button to choose No. 13.
o
Press Timer decrement or increment button to select desired temperature high limit of set temperature for
o
AUTO mode.
Press Timer Set button to confirm high limit selection.
o
LCD returns to original display if remote control does not operate for 30 seconds or press Timer Cancel
o
button.
Normal display mode
Press SW to enter customer zone &
SET
Press SW's to choose function 12
i) Display latest set temp (Low3).
ii) After reset, Low3 = 16°C (by default)
Use SW or
Range = 16°C ~ [High3]
Press SW to comfirm selection
SET
Memorize new
No code transmission
Low3 range
Normal display mode
Press SW to enter customer zone &
SET
Press
SW's to choose function 13
i) Display latest set temp (High3).
ii) After reset, High3 = 30°C (by default)
Use SW or
Range = [Low3] ~ 30°C
Press SW to comfirm selection
SET
Memorize new
No code transmission
range
High3
107
SW to change Low3 range
SW to change High3 range