Panasonic CS-Z20XKEW Service Manual page 105


To limit set temperature range for COOL & DRY, HEAT, AUTO mode.
Press "Set" button by using pointer.
o
Press TEMP increment or decrement button to choose No. 3.
o
Press Timer increment or decrement button to select desired temperature low limit of set temperature for
o
COOL & DRY mode.
Press Timer Set button to confirm low limit selection.
o
Press TEMP increment or decrement button to choose No. 4.
o
Press Timer decrement or increment button to select desired temperature high limit of set temperature for
o
COOL & DRY mode.
Press Timer Set button to confirm high limit selection.
o
Normal display mode
Press SW to enter customer zone &
SET
Press
i) Display latest set temp (Low2).
ii) After reset, Low2 = 16°C (by default)
Use SW or
Range = 16°C ~ [High2]
Press SW to comfirm selection
SET
Memorize new
Low2 range
Normal display mode
Press SW to enter customer zone &
SET
Press
i) Display latest set temp (High2).
ii) After reset, High2 = 30°C (by default)
Use SW or
Range = [Low2] ~ 30°C
Press SET SW to comfirm selection
Memorize new
range
High2
SW's to choose function 3
SW to change Low2 range
No code transmission
SW's to choose function 4
SW to change High2 range
No code transmission
105