Troubleshooting Table - Hanseatic HGU4582D10J7710EI User Manual

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING!
Risk of electric shock in case of improp-
er repair!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
Only authorised specialists may
■
repair the dishwasher. If in doubt,
contact our service department
(see page EN-40).
Only carry out the actions which are
■
described in this user manual.
Never repair defective dishwashers
■
– or dishwashers which you presume
to be defective – yourself. You can en-
danger yourself and subsequent users.
Problem
1 The dishwasher
cannot be switched on.
2 The selected pro-
gramme will not start
or it stops.
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
■
■
Possible cause
The mains plug has not
been inserted into a socket.
There is no voltage be-
ing supplied through the
socket.
The button was not
pressed.
The dishwasher's door is
not closed properly.
The water tap is not
properly on.
The inlet hose is
defective.
There is a risk of over-
flowing. The electrical wa-
ter stop system has been
activated.
Troubleshooting table
NOTICE
If water overfl ows, switch off the wa-
ter supply immediately and then con-
tact the service team (see page E N-40).
If the water has overfl owed, remove
any water standing in the dishwash-
er before relaunching a dishwashing
programme.
Solution
Insert the mains plug into the socket.
Check the fuse. Check the socket by
connecting another device.
Press button .
Close the dishwasher door.
Turn the water tap on completely.
Contact our service department (see„Service"
on page EN-40).
Page EN-37