Removal Operation Of Compressor - Gree GMV-24WL/C-T Service Manual

GREE
Remark: Before removing the motor, please make sure that the unit is disconnected with the power.
Process
5. Assemble
unit
Remark: Before removing the compressor, please make sure that there's no refrigerant inside the pipeline and the
Process
1. Remove wiring
cover of
compressor
2. Disconnect
compressor and
connected
pipeline
DC Inverter Side Discharge VRF Ⅱ for North America
Removal operation for blade
Photo

Removal operation of compressor

power is disconnected.
Photo
118
Operation Instruction
● Assemble the unit in the the
converse sequence
Operation Instruction
● Loose screws fiixng
the compressor with
screwdriver
● Then pull out the
power cord
Note: When
removing the power
cord, make marks for
different color power
cords and
corresponding wiring
terminals for wrong
terminal.
● Weld suction pipe
and discharge pipe of
compressor
● then pull out the
connection pipe from
the compressor
Note: During welding
process, do not let
the flame burn out
other parts.