GREE
Remark: Before removing the motor, please make sure that the unit is disconnected with the power.
Process
1. Remove grille
2. Remove
blade
3. Remove
motor
4. Install motor
DC Inverter Side Discharge VRF Ⅱ for North America
Removal operation for blade
Photo
117
Operation Instruction
● Loose screws fixing the panel
with screwdriver
● Then remove the grille
● Loosen nuts fixing the blade
with wrench
● Then remove the blade and put
it on the floor flatly
● Loose screws fixing the motor
with screwdriver
● then remove the power cord of
motor
● Take out the damaged motor
● Replace the motor, tighten
screws with screwdriver and then
connect the power cord of motor