GREE
Remark: Before removing the 4-way valve, please make sure that there's no refrigerant inside the pipeline of system
Process
2.Disconnect
the 4-way valve
and connection
pipeline
3. Replace
4-way valve
4. Replace
4-way valve
DC Inverter Side Discharge VRF Ⅱ for North America
Removal operation for 4-way valve
and then power is disconnected.
Photo
121
Operation Instruction
● Weld those 4
connection spots on
4-way valve, and
then pull out the
connection pipe
Note: During welding
process, do not let
the flae burn out
other parts
● Replace 4-way
valve
Note: During welding
process, do not let
the flame burn out
other parts
● Weld the
connection position
between 4-way valve
and pipeline
Note: During welding
process, do not let
flame burn out other
parts