134317746 System Time Is Modified; 134317747 Clear Performance Data - Zte ZXMW NR8250 Manual

ZXMW NR8250 Alarm and Notification Handling Reference
Possible Causes
If the ACM mode is disabled, the alarm is caused by user configuration modification. If the
ACM mode is enabled, the alarm is caused by link status change. Users can enable the
ACM mode by selecting Radio Link > Basic Configuration.
Handling Procedure
The notification is reported when the ACM mode is changed due to configuration
modification or link status change. It is not a fault.

3.38 134317746 System time is modified

Notification Property
l
Notification Code: 134317746
l
Notification Information: The notification is reported when the system time is modified
due to SNTP-based time calibration.
l
Notification Type: Equipment Alarm
Sub-code Description
None
Effect on the System
The traffic carried by the board is not affected, but the performance data may become
incomplete.
Possible Causes
The system time is modified .
Handling Procedure
Ensure that the SNTP server time is accurate.

3.39 134317747 Clear performance data

Notification Property
l
Notification Code: 134317747
l
Notification Information: This notification is reported when the system clears the
performance data of specified granularity (15 minutes or 24 hours) of a performance
index.
l
Notification Type: Equipment Alarm
SJ-20111008094748-008|2012–05–30 (R1.1)
3-24
ZTE Proprietary and Confidential