Related Manuals for Avalue Technology EMX-SKLGP
Summary of Contents for Avalue Technology EMX-SKLGP
- Page 1 EMX-SKLGP Intel 6th Generation ULT Processor Thin Mini ITX Motherboard User’s Manual Ed – 13 July 2018 Part No. E2047MSUG01R...
- Page 2 Disclaimer Avalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. Avalue Technology assumes no responsibility or liability for the...
- Page 3 Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
- Page 4 A product returned without proof of the purchase date is not eligible for warranty service. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer. 4 EMX-SKLGP User’s Manual...
-
Page 5: Table Of Contents
2.3.20 Audio connector (FAUD1) ......................32 2.3.21 EC Debug (JEC_SPI) ........................32 2.3.22 Battery connector (BT1) ........................ 33 2.3.23 SPI connector (JSPI1) ........................33 2.3.24 PS/2 keyboard & mouse header (KB/MS) ..................34 2.3.25 Sony/Philips Digital Interface (SPDIF1) ..................34 EMX-SKLGP User’s Manual... - Page 6 3.6.2.6.4 Serial Port 4 Configuration ....................55 3.6.2.6.5 Serial Port 5 Configuration ....................55 3.6.2.6.6 Serial Port 6 Configuration ....................56 3.6.2.7 EC 8528 HW monitor ......................56 3.6.2.8 S5 RTC Wake Settings ......................57 3.6.2.9 Serial Port Console Redirection .................... 58 6 EMX-SKLGP User’s Manual...
- Page 7 Install Chipset Driver ....................81 Install VGA Driver ....................82 Install ME Driver ...................... 83 Install Audio Driver (For Realtek ALC892 HD Audio) ..........84 Install LAN Driver ....................85 Install RST Driver ....................87 5. Mechanical Drawing ....................89 EMX-SKLGP User’s Manual...
-
Page 8: Getting Started
1.2 Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: 1 x EMX-SKLGP motherboard 1 x SATA cables 1 x I/O Shield ... -
Page 9: Document Amendment History
Update Setting Jumpers & Connectors 1.4 Manual Objectives This manual describes in details Avalue Technology EMX-SKLGP Single Board. We have tried to include as much information as possible but we have not duplicated information that is provided in the standard IBM Technical References, unless it proved to be necessary to aid in the understanding of this board. -
Page 10: System Specifications
1 x Intel® I219LM Gigabit Ethernet PHY LAN Chip 1 x Intel® I211AT PCI-e Gigabit Ethernet Ethernet Gigabit Ethernet Interface Internal I/O Connectors 1 x 1 x 4 pin, pitch 2.54mm CPU fan connector with smart fan function supported 10 EMX-SKLGP User’s Manual... - Page 11 1 x 3 pin, pitch 2.00mm connector for CMOS clear 1 x 1 x 4 pin, pitch 2.54mm CPU fan connector with smart fan function supported 2 x 1 x 4 pin, pitch 2.00mm connector for LAN Activity Indicator LED (TBC) EMX-SKLGP User’s Manual 11...
- Page 12 Test Fh : Vibration broadband random Test 1. PSD: 0.026G²/Hz , 2.16 Grms Vibration Test 2. Non-operation mode 3. Test Frequency : 5-500Hz 4. Test Axis : X,Y and Z axis 5. 30 min. per each axis Random Vibration Operation 12 EMX-SKLGP User’s Manual...
- Page 13 Packing Drop Reference ISTA 2A, Method : IEC-60068-2-32 Test:Ed Test Ea : Drop Test Drop Test 1 One corner , three edges, six faces 2 ISTA 2A, IEC-60068-2-32 Test:Ed Note: Specifications are subject to change without notice. EMX-SKLGP User’s Manual 13...
-
Page 14: Architecture Overview-Block Diagram
EMX-SKLGP User’s Manual 1.6 Architecture Overview—Block Diagram The following block diagram shows the architecture and main components of EMX-SKLGP. 14 EMX-SKLGP User’s Manual... -
Page 15: Expansion Design
User’s Manual 1.7 Expansion design Expansion Design – Gold Finger Expansion Design – IET Connector EMX-SKLGP User’s Manual 15... -
Page 16: Hardware Configuration
EMX-SKLGP User’s Manual 2. Hardware Configuration 16 EMX-SKLGP User’s Manual... -
Page 17: Product Overview
User’s Manual 2.1 Product Overview EMX-SKLGP User’s Manual 17... -
Page 18: Jumper And Connector List
Clear CMOS 2 x 1 header, pitch 2.00mm SATA/PCIE slot selector Connectors Label Function Note FPT1 Miscellaneous setting connector 1 5 x 2 header, pitch 2.54mm FPT2 Miscellaneous setting connector 2 5 x 2 header, pitch 2.54mm 18 EMX-SKLGP User’s Manual... - Page 19 5 x 1 header, pitch 2.00mm HDMI1 HDMI connector LOUT1 Line-out audio jack MIC1 Mic-in audio jack 5 x 1 header, pitch 2.54mm DMIC1 Mic-in connector FAN1 CPU Fan connector 1 x 4 wafer, pitch 2.54 mm VGA1 VGA connector EMX-SKLGP User’s Manual 19...
- Page 20 EMX-SKLGP User’s Manual SIM1 SIM card slot PS/2 keyboard & mouse header 4 x 2 header, pitch 2.00mm KB/MS Battery connector 2 x 1 wafer, pitch 1.25mm Gold Finger IET Connector 40 x 2 wafer, pitch 0.8mm IET_CB1 20 EMX-SKLGP User’s Manual...
-
Page 21: Setting Jumpers & Connectors
User’s Manual 2.3 Setting Jumpers & Connectors 2.3.1 Serial port 1/2 pin9 signal select (JRI1/JRI2) JRI1 Ring* JRI2 +12V * Default 2.3.2 LVDS Back Light power selection (JSBKL1) PWM Mode* DC Mode * Default EMX-SKLGP User’s Manual 21... -
Page 22: Lvds Back Light Power Selection (Jsbkl2)
DC Mode * Default 2.3.4 SATA/PCIE slot selector (JP1) PCIE* SATA * Default Note: When using Mini-PCIE, if the 51 pin of Mini-PCIe module is assigned for other purpose, please remove the jumper from JP1 directly. 22 EMX-SKLGP User’s Manual... -
Page 23: At/Atx Power Mode Select (Jsatx1)
User’s Manual 2.3.5 AT/ATX Power Mode Select (JSATX1) ATX* * Default 2.3.6 Clear CMOS (JCOMS1) Protect* Clear CMOS * Default EMX-SKLGP User’s Manual 23... -
Page 24: Lcd Inverter Connector (Jbkl1)
EMX-SKLGP User’s Manual 2.3.7 LCD Inverter connector (JBKL1) Signal +12V LVDS_BKLT_EN LVDS_BKLTCTL 2.3.8 LCD Inverter connector (JBKL2) Signal +12V LVDS2_BKLT_EN LVDS2_BKLTCTL 24 EMX-SKLGP User’s Manual... -
Page 25: Serial Port 1/2 Connector (Com1/2)
User’s Manual 2.3.9 Serial port 1/2 connector (COM1/2) COM1 COM2 Signal PIN PIN Signal COM_DCD# COM_RXD COM_TXD COM_DTR# COM_DSR# COM_RTS# COM_CTS# COM_RI# 2.3.10 General purpose I/O connector (DIO1) Signal PIN PIN Signal SMB_CLK_S SMB_DATA_S EMX-SKLGP User’s Manual 25... -
Page 26: Serial Port 3-6 Connector (Com3-6)
Signal PIN PIN Signal COM_DCD#_3 COM_RXD_3 COM_TXD_3 COM_DTR#_3 COM_DSR#_3 COM_RTS#_3 COM_CTS#_3 COM_RT#_3 COM_DCD#_4 COM_RXD_4 COM_TXD_4 COM_DTR#_4 COM_DSR#_4 COM_RTS#_4 COM_CTS#_4 COM_RT#_4 COM_DCD#_5 COM_RXD_5 COM_TXD_5 COM_DTR#_5 COM_DSR#_5 COM_RTS#_5 COM_CTS#_5 COM_RT#_5 COM_DCD#_6 COM_RXD_6 COM_TXD_6 COM_DTR#_6 COM_DSR#_6 COM_RTS#_6 COM_CTS#_6 COM_RT#_6 26 EMX-SKLGP User’s Manual... -
Page 27: Serial Port 1 Rs485/422 Mode Connector (Jrs485_1)
User’s Manual 2.3.12 Serial Port 1 RS485/422 Mode connector (JRS485_1) Signal PIN PIN Signal 485_422TX1- 422RX1- 485_422TX1+ 422RX1+ 2.3.13 Serial Port 2 RS485/422 Mode connector (JRS485_2) Signal PIN PIN Signal 485_422TX2- 422RX2- 485_422TX2+ 422RX2+ EMX-SKLGP User’s Manual 27... -
Page 28: Sata Power Connector 1 (Spwr1)
EMX-SKLGP User’s Manual 2.3.14 SATA Power connector 1 (SPWR1) Signal +V5S_SATA +V12S_SATA 2.3.15 CPU Fan connector (FAN1) Signal +12V CPUFANIN FAN_PWM0 28 EMX-SKLGP User’s Manual... -
Page 29: Usb Connector 3 (Usb3)
User’s Manual 2.3.16 USB connector 3 (USB3) Signal Signal +V5A_USB78 +V5A_USB78 USB_DN7 USB_DN8 USB_DP7 USB_DP8 2.3.17 USB connector 4 (USB4) Signal Signal +V5A_USB910 +V5A_USB910 USB_DN9 USB_DN10 USB_DP9 USB_DP10 EMX-SKLGP User’s Manual 29... -
Page 30: Lvds Connector (Lvds1)
EMX-SKLGP User’s Manual 2.3.18 LVDS connector (LVDS1) Signal PIN PIN Signal +3.3V +3.3V LVDS_DATA0_P LVDS_DATA1_P LVDS_DATA0_N LVDS_DATA1_N LVDS_DATA2_P LVDS_DATA3_P LVDS_DATA2_N LVDS_DATA3_N LVDS_DATA4_P LVDS_DATA5_P LVDS_DATA4_N LVDS_DATA5_N LVDS_DATA6_P LVDS_DATA7_P LVDS_DATA6_N LVDS_DATA7_N LVDS_CLK1_P LVDS_CLK2_P LVDS_ CLK1_N LVDS_ CLK2_N +12V +12V 30 EMX-SKLGP User’s Manual... -
Page 31: Lvds Connector (Lvds2)
User’s Manual 2.3.19 LVDS connector (LVDS2) Signal PIN PIN Signal +3.3V +3.3V LVDS2_DATA0_P LVDS2_DATA1_P LVDS2_DATA0_N LVDS2_DATA1_N LVDS2_DATA2_P LVDS2_DATA3_P LVDS2_DATA2_N LVDS2_DATA3_N LVDS2_DATA4_P LVDS2_DATA5_P LVDS2_DATA4_N LVDS2_DATA5_N LVDS2_DATA6_P LVDS2_DATA7_P LVDS2_DATA6_N LVDS2_DATA7_N LVDS2_CLK1_P LVDS2_CLK2_P LVDS2_ CLK1_N LVDS2_ CLK2_N +12V +12V EMX-SKLGP User’s Manual 31... -
Page 32: Audio Connector (Faud1)
EMX-SKLGP User’s Manual 2.3.20 Audio connector (FAUD1) Signal PIN PIN Signal LINE2_JD LINE2_LIN MIC2_JD LINE2_RIN AUD_FRONT_DET MIC2_RIN MIC2_LIN 2.3.21 EC Debug (JEC_SPI) Signal Signal +3VSPI_EC EC_FSCE# EC_FSCK EC_FMISO EC_FMOSI EC_HOLD# EC_SMCLK EC_SMDAT 32 EMX-SKLGP User’s Manual... -
Page 33: Battery Connector (Bt1)
User’s Manual 2.3.22 Battery connector (BT1) Signal +RTCBAT 2.3.23 SPI connector (JSPI1) Signal Signal HOLD# SPI_SI SPI_SO SPI_CLK SPI0_CS0# +3.3A_SPI EMX-SKLGP User’s Manual 33... -
Page 34: Ps/2 Keyboard & Mouse Header (Kb/Ms)
EMX-SKLGP User’s Manual 2.3.24 PS/2 keyboard & mouse header (KB/MS) Signal PIN PIN Signal KBDAT KBCLK MSDAT MSCLK 2.3.25 Sony/Philips Digital Interface (SPDIF1) Signal SPDIF_OUT 34 EMX-SKLGP User’s Manual... -
Page 35: Miscellaneous Setting Connector 1 (Fpt1)
User’s Manual 2.3.26 Miscellaneous setting connector 1 (FPT1) Signal PIN PIN Signal +HD_LED +PWR_LED -HD_LED -PWE_LED EC_SYSRST# FP_PWR_BTN_EC# 2.3.27 Miscellaneous setting connector 2 (FPT2) Signal PIN PIN Signal SPKR+ BLK_VR_MOD BLK_BRI_UP# BLK_BRI_DN# SPKR- EMX-SKLGP User’s Manual 35... -
Page 36: Led Indicator Connector 1 (Led1)
EMX-SKLGP User’s Manual 2.3.28 LED indicator connector 1 (LED1) Signal LAN1_1000#_LED LAN1_100#_LED LAN1_ACT_N LAN1_ACT_P 2.3.29 LED indicator connector 2 (LED2) Signal LAN2_1000#_LED LAN2_100#_LED LAN2_ACT_N LAN2_ACT_P 36 EMX-SKLGP User’s Manual... -
Page 37: Speaker Connector (Spk1)
User’s Manual 2.3.30 Speaker connector (SPK1) Signal SPK_R- SPK_R+ SPK_L- SPK_L+ 2.3.31 Mic-in connector (DMIC1) Signal DMIC_CLK DMIC_DATA +3.3V EMX-SKLGP User’s Manual 37... -
Page 38: I2C Connector (I2C1)
EMX-SKLGP User’s Manual 2.3.32 I2C connector (I2C1) Signal +3.3V INT_I2C0# I2C0_CLK I2C0_DATA 2.3.33 LPC connector (JLPC) Signal PIN PIN Signal LPC_AD0 +3.3V LPC_AD1 PCH_PLTRST# LPC_AD2 LPC_FRAME# LPC_AD3 LPC_CLK LPC_SERIRQ 38 EMX-SKLGP User’s Manual... -
Page 39: Power Connector (Pwr1)
User’s Manual 2.3.34 Power connector (PWR1) Signal Signal +VIN +VIN Note: VIN = 12~24V EMX-SKLGP User’s Manual 39... -
Page 40: Gold Finger (Gf)
PCIE_TX3+ B22 A22 PCIE_RX2+ PCIE_TX3- B23 A23 PCIE_RX2- B24 A24 SATA_TX+ B25 A25 PCIE_RX3+ SATA_TX- B26 A26 PCIE_RX3- B27 A27 USB_D+ B28 A28 SATA_RX+ USB_D- B29 A29 SATA_RX- B30 A30 B31 A31 DEVSLP PWR_BTN# B32 A32 40 EMX-SKLGP User’s Manual... -
Page 41: Iet Connector (Iet_Cb1)
PCIE_CLK_REF- SMCLK SMDAT WAKE# PWROK PERST# 83,84,85,86--GND LPC_CLK LPC_AD0 LPC_AD1 LPC_AD2 LPC_AD3 LPC_DRQ0# LPC_SERIRQ 56 LPC_FRAME# USB_D0+ Signal PIN PIN Signal USB_D0- PCIE_RX0+ PCIE_TX0+ USB_D1+ PCIE_RX0- PCIE_TX0- USB_D2- PCIE_RX1+ PCIE_TX1+ PCIE_RX1- PCIE_TX1- +12V +12V 87,88,89,90--VCCSB KEY EMX-SKLGP User’s Manual 41... -
Page 42: Bios Setup
EMX-SKLGP User’s Manual 3.BIOS Setup 42 EMX-SKLGP User’s Manual... -
Page 43: Introduction
If you do not press the keys at the correct time and the system does not boot, an error message will be displayed and you will again be asked to. Press F1 to Continue, DEL to enter SETUP EMX-SKLGP User’s Manual 43... -
Page 44: Using Setup
Note: Some of the navigation keys differ from one screen to another. • To Display a Sub Menu Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “” pointer marks all sub menus. 44 EMX-SKLGP User’s Manual... -
Page 45: Getting Help
BIOS Vendor and your systems manufacturer to provide the absolute maximum performance and reliability. Even a seemingly small change to the chipset setup has the potential for causing you to use the override. EMX-SKLGP User’s Manual 45... -
Page 46: Bios Setup
<Enter> to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. 46 EMX-SKLGP User’s Manual... -
Page 47: System Language
Visit the Avalue website (www.avalue.com.tw) to download the latest product and BIOS information. 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. EMX-SKLGP User’s Manual 47... -
Page 48: Cpu Configuration
Number of cores to enable in each processor Active Processor Cores package. Enabled for Windows XP and Linux (OS Disabled, optimized for Hyper-Threading Technology) Hyper-Threading Enabled[Default] and Disabled for other OS (OS not optimized for Hyper-Threading Technology). 48 EMX-SKLGP User’s Manual... -
Page 49: Power & Performance
3.6.2.2 Power & Performance 3.6.2.2.1 CPU-Power Management Control Item Options Description Enable/Disable processor Turbo Mode Disabled, (requires EMTTM enabled too). AUTO means Turbo Mode Enabled[Default] enabled, unless max turbo ratio is bigger than 16 – SKL A0 W/A. EMX-SKLGP User’s Manual 49... -
Page 50: Pch-Fw Configuration
C states Allows CPU to go to C states when it’s not Disabled, 100% utilized. 3.6.2.3 PCH-FW Configuration 3.6.2.3.1 Firmware Update Configuration Item Options Description Disabled[Default] Enable/Disable Me FW Image Re-Flash Me FW Image Re-Flash Enabled, function 50 EMX-SKLGP User’s Manual... -
Page 51: Trusted Computing
User’s Manual 3.6.2.4 Trusted Computing Item Options Description Enable/Disable BIOS support for security Enabled[Default] device. O.S. will not show Security Security Device Support Disabled, Device.TCG EFI protocol and INT1A interface will not be available. 3.6.2.5 APCI Settings EMX-SKLGP User’s Manual 51... -
Page 52: It8528 Super Io Configuration
Last state Disabled[Default], 30 sec 40 sec 50 sec Watch Dog Select WatchDog. 1 min 2 min 10 min 30 min Disabled Enabled/Disabled USB Standby Power USB Standby Power Enabled[Default] during S3/S4/S5. 3.6.2.6 IT8528 Super IO Configuration 52 EMX-SKLGP User’s Manual... -
Page 53: Serial Port 1 Configuration
Set Parameters of Serial Port 6 (COMF). 3.6.2.6.1 Serial Port 1 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled UART 232[Default], UART 232 422 485 UART 422, Change the Serial Port as RS232/422/485. UART 485 EMX-SKLGP User’s Manual 53... -
Page 54: Serial Port 2 Configuration
3.6.2.6.2 Serial Port 2 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled UART 232[Default], UART 232 422 485 UART 422, Change the Serial Port as RS232/422/485. UART 485 3.6.2.6.3 Serial Port 3 Configuration 54 EMX-SKLGP User’s Manual... -
Page 55: Serial Port 4 Configuration
Item Option Description Disabled Serial Port Enable or Disable Serial Port (COM). Enabled[Default], 3.6.2.6.4 Serial Port 4 Configuration Item Option Description Disabled Serial Port Enable or Disable Serial Port (COM). Enabled[Default], 3.6.2.6.5 Serial Port 5 Configuration EMX-SKLGP User’s Manual 55... -
Page 56: Serial Port 6 Configuration
Item Option Description Disabled Enable or Disable Serial Port Serial Port Enabled[Default], (COM). 3.6.2.6.6 Serial Port 6 Configuration Item Option Description Disabled Enable or Disable Serial Port Serial Port Enabled[Default], (COM). 3.6.2.7 EC 8528 HW monitor 56 EMX-SKLGP User’s Manual... -
Page 57: S5 Rtc Wake Settings
Item Options Description Enabled or disable System wake on alarm event.Select Fixed Time,system will wake on Disabled[Default], Wake system from S5 the hr::min::sec specified.Select Dynamic Enabled Time,System will wake on the current time + Increase minute(s) EMX-SKLGP User’s Manual 57... -
Page 58: Serial Port Console Redirection
3.6.2.9 Serial Port Console Redirection Item Option Description Disabled[Default], Console Redirection Console Redirection Enabled or Disable. Enabled Legacy Console Legacy Console Redirection Settings Redirection Settings Disabled[Default], Console Redirection Console Redirection Enabled or Disable. Enabled 3.6.2.10 Legacy Serial Redirection Port 58 EMX-SKLGP User’s Manual... -
Page 59: Intel Txt Information
User’s Manual Item Option Description Select a COM port to display Legacy Serial Redirection Port COM1 redirection of Legacy OPROM Messages 3.6.2.11 Intel TXT Information 3.6.2.12 Network Stack Configuration EMX-SKLGP User’s Manual 59... -
Page 60: Csm Configuration
EMX-SKLGP User’s Manual Item Options Description Disabled[Default] Network Stack Enable/Disable UEFI Network Stack. Enabled 3.6.2.13 CSM Configuration Item Options Description Enabled CSM Support Enable/Disable CMS Support. Disabled[Default] 3.6.2.14 NVMe controller and Drive information 60 EMX-SKLGP User’s Manual... -
Page 61: Usb Configuration
Root port it is 100ms, for a Hub port the delay is taken form Hub descriptor. Auto[Default] Mass storage device emulation.’AUTO’ JetFlashTranscend 8GB 1100 Floppy enumerates devices according to their media Forced FDD format.Optical drives are emulated as EMX-SKLGP User’s Manual 61... -
Page 62: Chipset
EMX-SKLGP User’s Manual Hard Disk ‘CDROM’,drive with no media will be emulated CD-ROM according. 3.6.3 Chipset 3.6.3.1 System Agent (SA) Configuration Item Option Description Enabled[Default] VT-d VT-d capability. Disabled 62 EMX-SKLGP User’s Manual... -
Page 63: Graphics Configuration
Aperture Size 512MB 2048MB aperture.To use this feature, 1024MB To use this feature,please disable 2048MB CSM Support. 256M[Default] Select DVMT5.0 Total Graphic DVMT Total Gfx Mem 128M Memory size used by the Intemal Graphics Device. EMX-SKLGP User’s Manual 63... -
Page 64: Pch-Io Configuration
EMX-SKLGP User’s Manual 3.6.3.2 PCH-IO Configuration Item Option Description Enabled[Default] PCH LAN(I219) Controller Enable/Disable onboard NIC. Disabled Enabled[Default] Enable/Disable integratsd LAN to Wake on LAN Enavle Disabled wake the system. 3.6.3.2.1 PCI Express Configuration 64 EMX-SKLGP User’s Manual... -
Page 65: Pci Express Root Port 1 (Gold Finger)
L0s State AUTO – BIOS auto configure DISABLE – Disables ASPM. Disabled[Default] Disabled[Default] L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2, Auto[Default] Gen1 PCIe Speed Configure PCIe speed. Gen2 Gen3 EMX-SKLGP User’s Manual 65... -
Page 66: Pci Express Root Port 2(Gold Finger)
L0s State AUTO – BIOS auto configure DISABLE – Disables ASPM. Disabled[Default] Disabled[Default] L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2 Auto[Default] Gen1 PCIe Speed Configure PCIe speed. Gen2 Gen3 66 EMX-SKLGP User’s Manual... -
Page 67: Pci Express Root Port3 (Iet Solt)
L0s State AUTO – BIOS auto configure DISABLE – Disables ASPM. Disabled[Default] Disabled[Default] L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2, Auto[Default] Gen1 PCIe Speed Configure PCIe speed. Gen2 Gen3 EMX-SKLGP User’s Manual 67... -
Page 68: Pci Express Root Port4(Iet Solt)
L0s State AUTO – BIOS auto configure DISABLE – Disables ASPM. Disabled[Default] Disabled[Default] L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2, Auto[Default] Gen1 PCIe Speed Configure PCIe speed. Gen2 Gen3 68 EMX-SKLGP User’s Manual... -
Page 69: Pci Express Root Port6(I211)
L0s State AUTO – BIOS auto configure DISABLE – Disables ASPM. Disabled[Default] Disabled[Default] L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2, Auto[Default] Gen1 PCIe Speed Configure PCIe speed. Gen2 Gen3 EMX-SKLGP User’s Manual 69... -
Page 70: Pci Express Root Port7(Mpcie)
L0s State AUTO – BIOS auto configure DISABLE – Disables ASPM. Disabled[Default] Disabled[Default] L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2, Auto[Default] Gen1 PCIe Speed Configure PCIe speed. Gen2 Gen3 70 EMX-SKLGP User’s Manual... -
Page 71: Pci Express Root Port9(M.2 Keya)
L0s State AUTO – BIOS auto configure DISABLE – Disables ASPM. Disabled[Default] Disabled[Default] L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2, Auto[Default] Gen1 PCIe Speed Configure PCIe speed. Gen2 Gen3 EMX-SKLGP User’s Manual 71... -
Page 72: Sata And Rst Cofiguration
Solid State Drive State Drive or Hard Disk Drive. Disabled, Port3 Enable/Disable SATA Port. Enabled[Default] Hard Disk Drive[Default] Identify the SATA port is connected to Solid SATA Device Type Solid State Drive State Drive or Hard Disk Drive. 72 EMX-SKLGP User’s Manual... -
Page 73: Usb Configuration
User’s Manual 3.6.3.2.3 USB Configuration Item Option Description Option to disable Compliance Mode. Default FALSE[Default], XHCI Disable Compliance Mode is FALSE to not disable Compliance Mode. TRUE Set TRUE to disable Compliance Mode. 3.6.3.2.4 HD Audio Configuration EMX-SKLGP User’s Manual 73... -
Page 74: Board & Panel Configuration
Select Panel(LVDS1/ Panel Back Light PWM LVDS2)back light PWM Frequency Frequency. Disabled Active Intemal LVDS(eDP–＞ Active Panel(eDP/LVDS1) Enabled [Default], Ch7511-to-LVDS1) 1024X768 24/1[Default] Port2-DP to LVDS(Chrontel CH7511 EDID Panel Option 800x600 18/1 Configuration 7511)Panel EDID 1024X768 18/1 Option 74 EMX-SKLGP User’s Manual... -
Page 75: Security
LVDS1: BIOS/BR Button/VR/OS Panel Brightness control BR Button Driver Method LVDS2: BIOS only OS Driver Select Panel(eDP/LVDS1) back Panel Brightness light PWM duty. 100%[Default] 3.6.4 Security Administrator Password Set Administrator Password User Password Set User Password EMX-SKLGP User’s Manual 75... -
Page 76: Secure Boot
Secure Boot mode selector. Standard/Custom.In Standard Secure Boot Mode Custom mode Secure Boot Variables can be Custom[Default] configured without authentication Disabled[Default] Enables expert users to modify Secure Boot Key Management Enabled Policy Variables without full authentication 76 EMX-SKLGP User’s Manual... -
Page 77: Key Management
User’s Manual 3.6.4.1.1 Key Management Item Option Description Disabled[Default] Allow to provision factory default Secure Provision Factory Defaults Enabled Boot key when System is in Setup Mode 3.6.5 Boot EMX-SKLGP User’s Manual 77... -
Page 78: Save And Exit
Save and Exit 3.6.6.1 Save Changes and Reset Reset the system after saving the changes. 3.6.6.2 Discard Changes and Reset Reset system setup without saving any changes. 3.6.6.3 Restore Defaults Restore/Load Default values for all the setup options. 78 EMX-SKLGP User’s Manual... -
Page 79: Launch Efi Shell From Filesystem Device
User’s Manual 3.6.6.4 Launch EFI Shell from filesystem device Attempts to Launch EFI Shell application (Shell.efi) from one of the available filesystem devices. EMX-SKLGP User’s Manual 79... -
Page 80: Drivers Installation
EMX-SKLGP User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen. 80 EMX-SKLGP User’s Manual... -
Page 81: Install Chipset Driver
Windows 10 operation system. If the warning message appears while the installation process, click Continue to go on. Step 3. Click Install. Step1. Click Next. Step 4. Complete setup. Step 2. Click Accept. EMX-SKLGP User’s Manual 81... -
Page 82: Install Vga Driver
Windows 10 operation system. Step 3. Click Install. Step 1. Click Next to continue installation. Step 4. Click Next Step 2. Step 5. Click Finish to complete setup. Click Yes to accept license agreement. 82 EMX-SKLGP User’s Manual... -
Page 83: Install Me Driver
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Next. Step 4. Click Finish to complete setup. Step 1. Click Next to continue setup. Step 2. Click Next. EMX-SKLGP User’s Manual 83... -
Page 84: Install Audio Driver (For Realtek Alc892 Hd Audio)
Windows 10 operation system. If the warning message appears while the installation process, click Continue to go on. Step1. Click Next to Install. Step 2. Click Finish to complete setup. 84 EMX-SKLGP User’s Manual... -
Page 85: Install Lan Driver
Windows 10 operation system. Step 3. Click Next. Step 1. Click Next to continue installation. Step 4. Click Install. Step 4. Click Don’t Install. Step 2. Click Next. EMX-SKLGP User’s Manual 85... - Page 86 EMX-SKLGP User’s Manual Step 6. Click Finish to complete setup. 86 EMX-SKLGP User’s Manual...
-
Page 87: Install Rst Driver
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Next. Step 1. Click Next to continue installation. Step 4. Click Next. Step 2. Click Next. Step 5. Click Next. EMX-SKLGP User’s Manual 87... - Page 88 EMX-SKLGP User’s Manual Step 6. Click Finish to complete setup. 88 EMX-SKLGP User’s Manual...
-
Page 89: Mechanical Drawing
User’s Manual 5. Mechanical Drawing EMX-SKLGP User’s Manual 89... - Page 90 EMX-SKLGP User’s Manual Unit: mm 90 EMX-SKLGP User’s Manual...
- Page 91 User’s Manual Unit: mm EMX-SKLGP User’s Manual 91...
- Page 92 EMX-SKLGP User’s Manual Unit: mm 92 EMX-SKLGP User’s Manual...
Need help?
Do you have a question about the EMX-SKLGP and is the answer not in the manual?
Questions and answers