Related Manuals for Avalue Technology EMX-WHLGP
Summary of Contents for Avalue Technology EMX-WHLGP
- Page 1 EMX-WHLGP 8th Gen Intel® Whiskey Lake U Core™ SoC i7/i5/i3 & Celeron® BGA Onboard Processor Thin MINI ITX motherboard User’s Manual Ed – 02 March 2020 Part No. E2047MXWH00R...
- Page 2 Disclaimer Avalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. Avalue Technology assumes no responsibility or liability for the...
- Page 3 Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
- Page 4 A product returned without proof of the purchase date is not eligible for warranty service. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer. 4 EMX-WHLGP User’s Manual...
-
Page 5: Table Of Contents
2.3.21 Miscellaneous setting connector 1 (FPT1) ..................31 2.3.22 Miscellaneous setting connector 2 (FPT2) ..................31 2.3.23 LED indicator connector 1 (LED1) ....................32 2.3.24 LED indicator connector 2 (LED2) ....................32 2.3.25 LED indicator connector 3 (LED3) ....................33 EMX-WHLGP User’s Manual... - Page 6 EC 8528 HW monitor ......................55 3.6.2.7.1 EC 8528 HW monitor-note ....................56 3.6.2.8 S5 RTC Wake Settings ......................57 3.6.2.9 Serial Port Console Redirection .................... 57 3.6.2.9.1 Legacy Serial Redirection Port ....................58 3.6.2.10 USB Configuration ......................... 59 6 EMX-WHLGP User’s Manual...
- Page 7 Install Chipset Driver ....................81 Install VGA Driver ....................82 Install ME Driver ...................... 83 Install Audio Driver (For Realtek ALC892 HD Audio) ..........84 Install LAN Driver ....................85 Install RST Driver ....................87 5. Mechanical Drawing ....................89 EMX-WHLGP User’s Manual...
-
Page 8: Getting Started
1.2 Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: 1 x EMX-WHLGP motherboard 1 x SATA cable 1 x SATA power cable ... -
Page 9: Order Information
No heatsink, heater Intel Core i5-8365UE Thin MiniITX Board With heatsink, heater EMX-WHLGP-83A1-01R EMX-WHLGP-866-A1R No heatsink, heater Intel Core i7-8665UE Thin MiniITX Board EMX-WHLGP-86A1-01R With heatsink, heater 1.4 Document Amendment History Revision Date Comment March 2020 Avalue Initial Release EMX-WHLGP User’s Manual... -
Page 10: Manual Objectives
We strongly recommend that you study this manual carefully before attempting to set up EMX-WHLGP or change the standard configurations. Whilst all the necessary information is available in this manual we would recommend that unless you are confident, you contact your supplier for guidance. -
Page 11: System Specifications
Realtek ALC892 HD Audio Decoding Controller Audio Amp TI TPA3113D2PWP Stereo Class-D 6W x 2 Ethernet 1 x Intel® I219LM Gigabit Ethernet PHY LAN Chip 2 x Intel® I210IT PCI-e Gigabit Ethernet (Co-lay Intel® I211AT/I210AT) Ethernet Gigabit Ethernet EMX-WHLGP User’s Manual 11... - Page 12 1 x 2 x 20 pin, pitch 1.25mm connector for LVDS (must be using WF40H6-7GAA178 connector) 1 x 1 x 5 pin, pitch 2.00mm Wafer connector for LCD inverter backlight connector (5V/12V) 1 x 1 x 3 pin, pitch 2.54mm connector LCD backlight brightness adjustment (PWM/DC) 12 EMX-WHLGP User’s Manual...
- Page 13 OS Support Win10 64bit, Linux Note: 1. EMX-WHLGP standard package does not include I/O bracket due to LAN 2 & 3 connector exceed standard Thin MiniITX chassis. Customer need to customized chassis and I/O bracket base on needed application. 2. HDMI1 signal from eDP converter to HDMI, thus HDMI1 does not support hot plug and audio output. Also,...
-
Page 14: Architecture Overview-Block Diagram
EMX-WHLGP User’s Manual HDMI1 Signal share with LVDS, default LVDS. 3. With heatsink and heater, it takes around 8 to 10 minutes for EMX-WHLGP boot up from -20°C. 1.7 Architecture Overview—Block Diagram The following block diagram shows the architecture and main components of EMX-WHLGP. -
Page 15: Hardware Configuration
User’s Manual 2. Hardware Configuration EMX-WHLGP User’s Manual 15... -
Page 16: Product Overview
EMX-WHLGP User’s Manual 2.1 Product Overview 16 EMX-WHLGP User’s Manual... - Page 17 User’s Manual EMX-WHLGP User’s Manual 17...
-
Page 18: Jumper And Connector List
JCOM2-RI-RS486 Serial port 1/2 pin9 signal select Connectors Label Function Note FPT1/2 Miscellaneous setting connector 1/2 5 x 2 header, pitch 2.54mm SODIMM1/2 206-pin DDR4 SO-DIMM socket FAUD1 Front Audio connector 6 x 2 header, pitch 2.00mm 18 EMX-WHLGP User’s Manual... - Page 19 4 x 2 header, pitch 2.00mm 2 x 1 wafer, pitch 1.25mm BAT1 Battery connector LED Indicator for Heater 2 x 1 header, pitch 2.54mm JHT_LED JHT1/23/4/5/6 CPU Heatsink Heater Connector 2 x 1 header, pitch 2.00mm EMX-WHLGP User’s Manual 19...
-
Page 20: Setting Jumpers & Connectors
EMX-WHLGP User’s Manual 2.3 Setting Jumpers & Connectors 2.3.1 Serial port 1/2 pin9 signal select (JCOM1-R1-RS485) Ring* +12V * Default 2.3.2 Serial port 1/2 pin9 signal select (JCOM2-R1-RS485) Ring* +12V * Default 20 EMX-WHLGP User’s Manual... -
Page 21: Lvds Back Light Power Selection (Jsbkl1)
User’s Manual 2.3.3 LVDS Back Light power selection (JSBKL1) PWM Mode* DC Mode * Default 2.3.4 AT/ATX Power Mode Select (JSATX1) ATX* * Default EMX-WHLGP User’s Manual 21... -
Page 22: Clear Cmos (Jcoms1)
EMX-WHLGP User’s Manual 2.3.5 Clear CMOS (JCOMS1) Protect* Clear CMOS * Default 2.3.6 LCD Inverter connector (JBKL1) Signal +12V LVDS_BKLT_EN LVDS_BKLTCTL 22 EMX-WHLGP User’s Manual... -
Page 23: Serial Port 1 Connector (Com1)
2.3.7 Serial port 1 connector (COM1) Signal PIN PIN Signal COM_DCD#_1 COM_RXD_1 COM_TXD_1 COM_DTR#_1 COM_DSR#_1 COM_RTS#_1 COM_CTS#_1 COM_R#_1_R 2.3.8 Serial port 2 connector (COM2) Signal PIN PIN Signal COM_DCD#_2 COM_RXD_2 COM_TXD_2 COM_DTR#_2 COM_DSR#_2 COM_RTS#_2 COM_CTS#_2 COM_R#_2_R EMX-WHLGP User’s Manual 23... -
Page 24: General Purpose I/O Connector (Dio1)
EMX-WHLGP User’s Manual 2.3.9 General purpose I/O connector (DIO1) Signal PIN PIN Signal SMB_CLK_S SMB_DATA_S 2.3.10 SPI connector (JSPI1) Signal Signal +3.3A_SPI SPI0_CS0# SPI_CLK SPI_SO SPI_SI HOLD# SPI_WP# 24 EMX-WHLGP User’s Manual... -
Page 25: Serial Port 3-6 Connector (Com3-6)
Signal PIN PIN Signal COM_R#_6 COM_CTS#_6 COM_RTS#_6 COM_DSR#_6 COM_DTR#_6 COM_TXD_6 COM_RXD_6 COM_DCD#_6 COM_R#_5 COM_CTS#_5 COM_RTS#_5 COM_DSR#_5 COM_DTR#_5 COM_TXD_5 COM_RXD_5 COM_DCD#_5 COM_R#_4 COM_CTS#_4 COM_RTS#_4 COM_DSR#_4 COM_DTR#_4 COM_TXD_4 COM_RXD_4 COM_DCD#_4 COM_R#_3 COM_CTS#_3 COM_RTS#_3 COM_DSR#_3 COM_DTR#_3 COM_TXD_3 COM_RXD_3 COM_DCD#_3 EMX-WHLGP User’s Manual 25... -
Page 26: Sata Power Connector (Spwr1)
EMX-WHLGP User’s Manual 2.3.12 SATA Power connector (SPWR1) Signal +V5S_SATA1 +V12S_SATA1 2.3.13 CPU Fan connector (JFAN1) Signal +12V_FAN1 CPUFANIN FAN_PWM0 26 EMX-WHLGP User’s Manual... -
Page 27: Usb Connector 1(Usb1)
User’s Manual 2.3.14 USB connector 1(USB1) Signal Signal +V5A_HUB1-4 +V5A_HUB1-4 UHUB_DM1_R UHUB_DM2_R UHUB_DP1_R UHUB_DP2_R 2.3.15 USB connector 2(USB2) Signal Signal +V5A_HUB1-4 +V5A_HUB1-4 UHUB_DM3_R UHUB_DM4_R UHUB_DP3_R UHUB_DP4_R EMX-WHLGP User’s Manual 27... -
Page 28: Lvds Connector (Lvds1)
2.3.16 LVDS connector (LVDS1) Signal PIN PIN Signal +5V_LVDS +3.3V_LVDS +5V_LVDS +3.3V_LVDS LVDS_DATA0_P LVDS_DATA1_P LVDS_DATA0_N LVDS_DATA1_N LVDS_DATA2_P LVDS_DATA3_P LVDS_DATA2_N LVDS_DATA3_N LVDS_DATA4_P LVDS_DATA5_P LVDS_DATA4_N LVDS_DATA5_N LVDS_DATA6_P LVDS_DATA7_P LVDS_DATA6_N LVDS_DATA7_N LVDS_CLK1_P LVDS_CLK2_P LVDS_ CLK1_N LVDS_ CLK2_N +12V +12V 28 EMX-WHLGP User’s Manual... -
Page 29: Front Audio Connector (Faud1)
User’s Manual 2.3.17 Front Audio connector (FAUD1) Signal PIN PIN Signal GND_AUD MIC1_JD LINEOUT1_JR MIC1_LIN MIC1_RIN GND_AUD GND_AUD LINEOUT_L LINEOUT_R 2.3.18 EC Debug (JEC_DEBUG) Signal EC_SMCLK EC_SMDAT EMX-WHLGP User’s Manual 29... -
Page 30: Battery Connector (Bat1)
EMX-WHLGP User’s Manual 2.3.19 Battery connector (BAT1) Signal +VRTCBAT 2.3.20 PS/2 keyboard & mouse header (KB/MS) Signal PIN PIN Signal KBDAT KBCLK MSDAT MSCLK 30 EMX-WHLGP User’s Manual... -
Page 31: Miscellaneous Setting Connector 1 (Fpt1)
User’s Manual 2.3.21 Miscellaneous setting connector 1 (FPT1) Signal PIN PIN Signal -PWR _BTN -Reset +PWR _BTN +Reset -PWR_LED -HD_LED +PWR_LED +HD_LED 2.3.22 Miscellaneous setting connector 2 (FPT2) Signal PIN PIN Signal Speaker+ BLK_VR(10K) BLK_UP BLK_DN Speaker- EMX-WHLGP User’s Manual 31... -
Page 32: Led Indicator Connector 1 (Led1)
EMX-WHLGP User’s Manual 2.3.23 LED indicator connector 1 (LED1) Signal LAN1_ACT_P LAN1_ACT_N LAN1_100#_LED LAN1_1000#_LED 2.3.24 LED indicator connector 2 (LED2) Signal LAN2_ACT_P LAN2_ACT_N LAN2_100#_LED LAN2_1000#_LED 32 EMX-WHLGP User’s Manual... -
Page 33: Led Indicator Connector 3 (Led3)
User’s Manual 2.3.25 LED indicator connector 3 (LED3) Signal LAN3_ACT_P LAN3_ACT_N LAN3_100#_LED LAN3_1000#_LED 2.3.26 Speaker connector (SPK1) Signal SPK_L+ SPK_L- SPK_R+ SPK_R- EMX-WHLGP User’s Manual 33... -
Page 34: Ji2C Connector (Ji2C1)
EMX-WHLGP User’s Manual 2.3.27 JI2C connector (JI2C1) Signal +3.3V INT_I2C0# I2C0_CLK I2C0_DATA 2.3.28 LPC connector (JLPC1) Signal PIN PIN Signal LPC_SERIRQ LPC_CLK LPC_AD3 LPC_FRAME# LPC_AD2 PCH_PLTRST# LPC_AD1 +3.3V LPC_AD0 34 EMX-WHLGP User’s Manual... -
Page 35: Cpu Heatsink Heater Connector (Jht1/2/3/4/5/6)
User’s Manual 2.3.29 CPU Heatsink Heater Connector (JHT1/2/3/4/5/6) JHT2 JHT1 JHT5 JHT6 Signal +12V 2.3.30 LED Indicator for Heater (JHT_LED1) Signal EMX-WHLGP User’s Manual 35... -
Page 36: Power Connector (Pwr1)
EMX-WHLGP User’s Manual 2.3.31 Power connector (PWR1) Signal Signal +VIN +VIN Note: VIN = 12~24V 36 EMX-WHLGP User’s Manual... -
Page 37: Bios Setup
User’s Manual 3.BIOS Setup EMX-WHLGP User’s Manual 37... -
Page 38: Introduction
If you do not press the keys at the correct time and the system does not boot, an error message will be displayed and you will again be asked to. Press F1 to Continue, DEL to enter SETUP 38 EMX-WHLGP User’s Manual... -
Page 39: Using Setup
Note: Some of the navigation keys differ from one screen to another. To Display a Sub Menu Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “” pointer marks all sub menus. EMX-WHLGP User’s Manual 39... -
Page 40: Getting Help
BIOS Vendor and your systems manufacturer to provide the absolute maximum performance and reliability. Even a seemingly small change to the chipset setup has the potential for causing you to use the override. 40 EMX-WHLGP User’s Manual... -
Page 41: Bios Setup
<Enter> to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. EMX-WHLGP User’s Manual 41... -
Page 42: System Language
Visit the Avalue website (www.avalue.com.tw) to download the latest product and BIOS information. 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. 42 EMX-WHLGP User’s Manual... -
Page 43: Cpu Configuration
Item Options Description When enabled, a VMM can utilize the Intel (VMX) Virtualization Disabled, additional hardware capabilities provided by Technology Enabled[Default] Vanderpool Technology. All[Default] Number of cores to enable in each processor Active Processor Cores package. EMX-WHLGP User’s Manual 43... -
Page 44: Power & Performance
Allows more than two frequency ranges to be Intel(R) SpeedStep(tm) Enabled[Default] supported. Enable/Disable Intel(R) Speed Shift Intel(R) Speed Shift Disabled, Technology support. Enabling will expose the CPPC v2 interface to allow for hardware Technology Enabled[Default] controlled P-states. 44 EMX-WHLGP User’s Manual... -
Page 45: Config Tdp Configurations
This "BlOS only" feature does not Disabled[Default] require EC or driver support. Power Limit 1 in Milli Watts. BIOS will round to the nearest 1/8W when programming. 0 = no Power Limit 1 custom override. For 12.50W, enter 12500. Overclocking EMX-WHLGP User’s Manual 45... - Page 46 (28 sec). Defines time window which TDP value should be maintained. Custom value for Turbo Activation Ratio. ConfigTDP Turbo Activation Needs to be configured with valid values from Ratio LFM to Max Turbo. 0 means don't use custom value. 46 EMX-WHLGP User’s Manual...
-
Page 47: Gt - Power Management Control
Check to enable render standby support. Enabled[Default] Default Max Frequency[Default] 100Mhz 150Mhz 200Mhz 250Mhz 300Mhz 350Mhz 400Mhz 450Mhz 500Mhz 550Mhz Maximum GT frequency 600Mhz Auto Updated 650Mhz 700Mhz 750Mhz 800Mhz 850Mhz 900Mhz 950Mhz 1000Mhz 1050Mhz 1100Mhz 1150Mhz 1200Mhz EMX-WHLGP User’s Manual 47... -
Page 48: Pch-Fw Configuration
Temporarily Disabled Mode. When disabled AMT BIOS Features are no Disabled, longer supported and user is no longer able to AMT BIOS Features Enabled[Default] access MEBx Setup. Note: This option does not disable Manageability Features in FW. 48 EMX-WHLGP User’s Manual... -
Page 49: Firmware Update Configuration
User’s Manual 3.6.2.3.1 Firmware Update Configuration Item Options Description Disabled[Default], Enable/Disable Me FW lmage Re-Flash Me FW Image Re-Flash Enabled function. 3.6.2.4 Trusted Computing EMX-WHLGP User’s Manual 49... -
Page 50: Acpi Settings
Enable Hibernation Enabled[Default], may be not effective with some operating systems. Suspend Disabled, Select the highest ACPI sleep state the ACPI Sleep State S3 (Suspend to system will enter when the SUSPEND button RAM)[Default] is pressed. 50 EMX-WHLGP User’s Manual... -
Page 51: It8528 Super Io Configuration
Set Parameters of Serial Port 3 (COMC). Serial Port 4 Configuration Set Parameters of Serial Port 4 (COMD). Serial Port 5 Configuration Set Parameters of Serial Port 5 (COME). Serial Port 6 Configuration Set Parameters of Serial Port 6 (COMF). EMX-WHLGP User’s Manual 51... -
Page 52: Serial Port 1 Configuration
3.6.2.6.1 Serial Port 1 Configuration Item Option Description Disabled Serial Port Enable or Disable Serial Port (COM). Enabled[Default], UART 232[Default], UART 232 422 485 UART 422, Change the Serial Port as RS232/422/485. UART 485 3.6.2.6.2 Serial Port 2 Configuration 52 EMX-WHLGP User’s Manual... -
Page 53: Serial Port 3 Configuration
Enable or Disable Serial Port (COM). Enabled[Default], UART 232[Default], UART 232 422 485 UART 422, Change the Serial Port as RS232/422/485. UART 485 3.6.2.6.3 Serial Port 3 Configuration Item Option Description Disabled Serial Port Enable or Disable Serial Port (COM). Enabled[Default], EMX-WHLGP User’s Manual 53... -
Page 54: Serial Port 4 Configuration
3.6.2.6.4 Serial Port 4 Configuration Item Option Description Disabled Serial Port Enable or Disable Serial Port (COM). Enabled[Default], 3.6.2.6.5 Serial Port 5 Configuration Item Option Description Disabled Serial Port Enable or Disable Serial Port (COM). Enabled[Default], 54 EMX-WHLGP User’s Manual... -
Page 55: Serial Port 6 Configuration
User’s Manual 3.6.2.6.6 Serial Port 6 Configuration Item Option Description Disabled Serial Port Enable or Disable Serial Port (COM). Enabled[Default], 3.6.2.7 EC 8528 HW monitor EMX-WHLGP User’s Manual 55... -
Page 56: Ec 8528 Hw Monitor-Note
Smart Fan Function Enabled or Disable Smart Fan Enabled For finished product package with heatsink and heater attached, item Heat Heat CPU when temp < 0 CPU when temp < 0 would be enabled as default. 56 EMX-WHLGP User’s Manual... -
Page 57: S5 Rtc Wake Settings
Select Fixed Time, system will wake on Wake system from S5 Fixed Time the hr::min::sec specified. Select Dynamic Dynamic Time Time, System will wake on the current time + Increase minute(s) 3.6.2.9 Serial Port Console Redirection EMX-WHLGP User’s Manual 57... -
Page 58: Legacy Serial Redirection Port
Console Redirection is disabled before booting to legacy OS. When Always Enable Always Enable[Default], Redirect After POST is selected, then Legacy Console BootLoader Redirection is enabled for legacy OS. Default setting for this option is set to Always Enable. 58 EMX-WHLGP User’s Manual... -
Page 59: Usb Configuration
Mass storage device emulation type. ’AUTO’ Auto[Default] Floppy enumerates devices according to their media JetFlashTranscend 8GB 1100 Forced FDD format. Optical drives are emulated as ‘CDROM’, drive with no media will be Hard Disk CD-ROM emulated according to a drive type. EMX-WHLGP User’s Manual 59... -
Page 60: Nvme Controller And Drive Information
EMX-WHLGP User’s Manual 3.6.2.11 NVMe controller and Drive information 3.6.2.12 Network Stack Configuration 60 EMX-WHLGP User’s Manual... -
Page 61: Chipset
User’s Manual 3.6.3 Chipset 3.6.3.1 System Agent (SA) Configuration Item Option Description Disabled VT-d VT-d capability. Enabled[Default] EMX-WHLGP User’s Manual 61... -
Page 62: Memory Configuration
1GB[Default] 1.25GB Maximum Value of TOLUD. Dynamic 1.5GB assignment would adjust TOLUD Max TOLUD 1.75 GB automatically based on largest MMIO length 2 GB of installed graphic controller 2.25 GB 2.5 GB 2.75 GB 3 GB 62 EMX-WHLGP User’s Manual... -
Page 63: Graphics Configuration
Select the card used on the platform Auto : Auto[Default] Skip GPIO based Power Enable to dGPU Elk Select PCIE Card Elk Creek 4 Creek 4: DGPU Power Enable = ActiveLow PEG Eval PEG Eval : DGPU Power Enable = ActiveHigh EMX-WHLGP User’s Manual 63... -
Page 64: Pch-Io Configuration
3.6.3.2 PCH-IO Configuration Item Option Description Enabled[Default] PCH LAN(I219) Controller Enable/Disable onboard NIC. Disabled 3.6.3.2.1 PCI Express Configuration Item Option Description PCIe-9 switch Lan3 or GF slot Lan3 [Default] Select PCle-9 as Lan3-1210 or GF PCle 64 EMX-WHLGP User’s Manual... -
Page 65: Pcie Root Port 8(Lan2-I210)
L0s State AUTO - BIOS auto L0sL1 configure DISABLE - Disables ASPM. Auto, Disabled L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2[Default], Auto[Default] Gen1 PCIe Speed Configure PCIe speed. Gen2 Gen3 EMX-WHLGP User’s Manual 65... -
Page 66: Pcie Root Port 9(Lan3-I210/Gf Slot)
L0s State AUTO - BIOS auto L0sL1 configure DISABLE - Disables ASPM. Auto, Disabled L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2[Default], Auto[Default] Gen1 PCIe Speed Configure PCIe speed. Gen2 Gen3 66 EMX-WHLGP User’s Manual... -
Page 67: Pcie Root Port 10(M.2 Keya)
L0s State AUTO - BIOS auto L0sL1 configure DISABLE - Disables ASPM. Auto, Disabled L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2[Default], Auto[Default] Gen1 PCIe Speed Configure PCIe speed. Gen2 Gen3 EMX-WHLGP User’s Manual 67... -
Page 68: Pcie Root Port 11(M.2 Keyb/Sata0)
L0s State AUTO - BIOS auto L0sL1 configure DISABLE - Disables ASPM. Auto, Disabled L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2[Default], Auto[Default] Gen1 PCIe Speed Configure PCIe speed. Gen2 Gen3 68 EMX-WHLGP User’s Manual... -
Page 69: Pcie Root Port 13(Gp Pciex4)
L0s State AUTO - BIOS auto L0sL1 configure DISABLE - Disables ASPM. Auto, Disabled L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2[Default], Auto[Default] Gen1 PCIe Speed Configure PCIe speed. Gen2 Gen3 EMX-WHLGP User’s Manual 69... -
Page 70: Sata And Rst Configuration
State Drive or Hard Disk Drive. Disabled, Port1 Enable or Disable SATA Port. Enabled[Default] Hard Disk Drive[Default] Identify the SATA port is connected to Solid SATA Device Type Solid State Drive State Drive or Hard Disk Drive. 70 EMX-WHLGP User’s Manual... -
Page 71: Hd Audio Configuration
3.6.3.2.3 HD Audio Configuration Item Option Description Control Detection of the HD-Audio device. Disabled Disabled = HDA will be unconditionally HD Audio Enabled[Default], disabled Enabled = HDA will be unconditionally enabled. 3.6.3.3 Board & Panel Configuration EMX-WHLGP User’s Manual 71... - Page 72 Frequency Frequency Disabled[Default], ErP Function ErP Function (Deep S5). Enabled Off[Default], PWR-On After PWR-Fail AC Ioss resume. Last State Disabled[Default], 30 sec 40 sec Watch Dog 50 sec Select WatchDog 1 min 2 min 10 min 72 EMX-WHLGP User’s Manual...
-
Page 73: Security
Wake Up by Ring Wake Up by Ring from S3/S4/S5 Enabled[Default], Disabled Enabled/Disabled USB Standby Power USB Standby Power Enabled[Default], during S3/S4/S5 3.6.4 Security Administrator Password Set Administrator Password User Password Set User Password EMX-WHLGP User’s Manual 73... -
Page 74: Secure Boot
System is in User mode. The mode change requires platform reset Secure Boot mode options: Standard or Standard Custom. In Custom mode, Secure Boot Policy Secure Boot Mode Custom[Default], variables can be configured by a physically present user without full authentication 74 EMX-WHLGP User’s Manual... -
Page 75: Restore Factory Keys
User’s Manual 4.6.4.1.1 Restore Factory Keys 4.6.4.1.2 Reset To Setup Mode EMX-WHLGP User’s Manual 75... -
Page 76: Key Management
PE image into Authorized Signature Database (db) Device Guard ready system must not list 'Microsoft UEFI CA' Remove 'UEFI CA' from DB Certificate in Authorized Signature database (db) Restore DB defaults Restore DB variable to factory defaults 76 EMX-WHLGP User’s Manual... -
Page 77: Boot
65535(0xFFFF) means indefinite waiting. Bootup NumLock State Select the Keyboard NumLock state Off[Default] Disabled[Default] Quiet Boot Enables or disables Quiet Boot option Enabled Boot Option #1 Sets the system boot order. Boot Option #2 Sets the system boot order. EMX-WHLGP User’s Manual 77... -
Page 78: Save And Exit
EMX-WHLGP User’s Manual 3.6.6 Save and Exit 3.6.6.1 Save Changes and Reset Reset the system after saving the changes. 3.6.6.2 Discard Changes and Reset Reset system setup without saving any changes. 78 EMX-WHLGP User’s Manual... -
Page 79: Restore Defaults
User’s Manual 3.6.6.3 Restore Defaults Restore/Load Default values for all the setup options. 3.6.6.4 Launch EFI Shell from filesystem device Attempts to Launch EFI Shell application (Shell.efi) from one of the available filesystem devices. EMX-WHLGP User’s Manual 79... -
Page 80: Drivers Installation
EMX-WHLGP User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen. 80 EMX-WHLGP User’s Manual... -
Page 81: Install Chipset Driver
All drivers can be found on the Avalue Official Website: http://www.avalue.com.tw. Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Install. Step1. Click Next. Step 4. Complete setup. Step 2. Click Accept. EMX-WHLGP User’s Manual 81... -
Page 82: Install Vga Driver
Windows 10 operation system. Step 3. Click Install. Step 1. Click Next to continue installation. Step 4. Click Next Step 2. Step 5. Click Finish to complete setup. Click Yes to accept license agreement. 82 EMX-WHLGP User’s Manual... -
Page 83: Install Me Driver
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Next. Step 4. Click Finish to complete setup. Step 1. Click Next to continue setup. Step 2. Click Next. EMX-WHLGP User’s Manual 83... -
Page 84: Install Audio Driver (For Realtek Alc892 Hd Audio)
All drivers can be found on the Avalue Official Website: http://www.avalue.com.tw. Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step1. Click Next to Install. Step 2. Click Finish to complete setup. 84 EMX-WHLGP User’s Manual... -
Page 85: Install Lan Driver
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Next. Step 1. Step 4. Click Next. Click Install Drivers and Software. Step 2. Click Next. Step 5. Click Install. EMX-WHLGP User’s Manual 85... - Page 86 EMX-WHLGP User’s Manual Step 6. Click Finish to complete setup. 86 EMX-WHLGP User’s Manual...
-
Page 87: Install Rst Driver
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Next. Step 1. Click Next to continue installation. Step 4. Click Next. Step 2. Click Next. Step 5. Click Next. EMX-WHLGP User’s Manual 87... - Page 88 EMX-WHLGP User’s Manual Step 6. Click Finish to complete setup. 88 EMX-WHLGP User’s Manual...
-
Page 89: Mechanical Drawing
User’s Manual 5. Mechanical Drawing EMX-WHLGP User’s Manual 89... - Page 90 EMX-WHLGP User’s Manual Unit: mm 90 EMX-WHLGP User’s Manual...
- Page 91 User’s Manual Unit: mm EMX-WHLGP User’s Manual 91...
- Page 92 EMX-WHLGP User’s Manual 92 EMX-WHLGP User’s Manual...
- Page 93 User’s Manual Unit: mm EMX-WHLGP User’s Manual 93...
Need help?
Do you have a question about the EMX-WHLGP and is the answer not in the manual?
Questions and answers