Standards And Authorizations - Siemens SIMATIC ET 200AL System Manual

9.1

Standards and authorizations

Currently valid markings and authorizations
Note
Specifications for the components of the IO-Link I/O modules
The markings and approvals currently valid are printed on the IO-Link I/O modules.
CE mark
The ET 200AL IO-Link I/O modules fulfill the requirements and protection targets of the
following directives. They conform to the harmonized European standards (EN) that have
been published for programmable logic controllers in the Official Journal of the European
Community:
• 2014/30/EU "Electromagnetic Compatibility" (EMC directive)
• 2011/65/EU "Restriction of the use of certain hazardous substances in electrical and
electronic equipment" (RoHS Directive)
The EU Declarations of Conformity are available for the authorities in charge and are kept at
the following address:
Siemens AG
Digital Industries
Factory Automation
DI FA AS SYS
Postfach 1963
D-92209 Amberg
These files are also available for download on the Customer Support Internet pages, keyword
"Declaration of Conformity".
UL approval
Underwriters Laboratories Inc. in accordance with
• UL 61010-1 and UL 61010-2-201
• CSA C22.2 No. 61010-1 and CSA C22.2 No. 61010-2-201 (Process Control Equipment)
RCM Declaration of conformity for Australia/New Zealand
The ET 200AL IO-Link I/O modules meet the requirements of EN 61000-6-4:2007.
IO-Link I/O modules
System Manual, 10/2020, A5E48755395-AA
Technical specifications
9.1 Standards and authorizations
55