Advertisement
Available languages
Available languages
Installation and connection of the batteries
Personnel having suitable experience, knowledge and skills must carry out
the intervention.
Make sure to fulfil the required requirements in order to work under safe conditions.
Attention
Warning
Always wear suitable personal protective equipment in order to avoid safety
and health hazards.
– The figure shows the points of
intervention and the description
shows the procedures to be
adopted.
1. Loosen screws A and remove
them.
2. Slightly lift the rear side of pan-
el B and extract it forward to
remove it.
3. Loosen screwsC and remove
brackets D.
4. Insert batteries E into the spe-
cial seats.
5. Install brackets D and fix it with
screws C.
6. Connect clamps to the corre-
sponding poles of batteries E.
7. Connect the front side of panel
B to the machine and lower it to
starting position.
8. Introduce
and
tighten
screws A.
9. At the end of operations check
that there are no other tools or
other material near the moving
parts or in dangerous areas.
Important
When the batteries are used for
the first time, perform a full
charge cycle.
10. Start the machine and make
sure that the operation has
been carried out properly.
12
English language
the
Installation
Installation manual
Advertisement
Chapters
