Zephyr Tempest II AK7500CS Use, Care And Installation Manual page 23

ZEPHYRONLINE.COM
PBD-1200A Dual Blower Vertical Ducting
Tempest II Use, Care, and Installation Guide
Installation Instructions
4. Attach single blower to dual
blower plate by (4) previously
removed screws from step 3.
5. Position dual blower inside hood
body as shown. Be sure to tuck
dual blower plate into blower
plate tabs. Secure dual blower
by (4) screws previously removed
from step 2.
6. Attach 10" round blower collar
to top of hood body by (4) M3.5
x 8 screws. Connect blower wire
extension cable to new blower
and connect plugs from each
blower to female plugs behind
switch panel.
23