Table of Contents
Advertisement
DMP Plus Series C V / C V AT – Patton POTS
3.0 Configuring DMP Plus Series C V (AT) VoIP Lines
VoIP configuration of the DMP Plus Series is handled exclusively through a web interface,
served from the device itself. The VoIP landing page is accessed through an address of the
format -
http://192.168.254.254/www/voip.html
- where 192.168.254.254 in this example is the default IP address on LAN 1 of the DMP Plus
Series device.
Line 1 will be configured as a SIP to POTS connection
3.1 Network Interface Configuration
Need to make sure that the LAN 1 and LAN 2 IP subnets (IP address / Subnet) do not overlap.
The default subnet mask on LAN 1 of 255.255.0.0 needs to be changed to 255.255.255.0
The LAN 1 IP interface will be used for Setup and control. These settings can be changed per
your application.
1. Click on the Network tab followed by Interface tab
2. Under the LAN 1 Network interface:
a. IP address Mode:
b. IP address:
c. Subnet Mask:
d. Gateway:
3. Click Apply after making any changes
a. The Network interface will restart the VoIP services on the device.
4. After the network interface has restarted
Static
192.168.254.254
255.255.255.0
0.0.0.0
Revision Date:
10/16/2020
Page 14 of 28
Advertisement
Table of Contents
