Extron electronics DMP Plus Series Configuration Manual page 15

DMP Plus Series C V / C V AT – Patton POTS
5. Under VoIP Interface select LAN 2
a. The Default VoIP interface is LAN 1 and will need to be set to LAN 2
6. Under the LAN 2 Network interface:
a. IP address Mode:
b. IP address:
c. Subnet Mask:
d. Gateway:
7. Click Apply after making any changes
a. The Network interface will restart the VoIP services on the device.
Note: Make sure that the LAN 1 and LAN 2 IP subnets (IP address / Subnet) do not overlap
Static
192.168.1.254
255.255.255.0
0.0.0.0
Revision Date:
10/16/2020
Page 15 of 28