1.8
STARTING PROCEDURES
1.8.1
TURNING ON THE POWER
Push down the "I" side of the Power Switch to
1.
turn on the power.
The initial screen is displayed.
3.
Note: The contents of the initial screen may differ
depending on the settings on your machine.
1.8.2
ZERO ADJUSTMENT
If the "ZERO" indicator does not appear in the
1.
display, press the [ZERO] key.
1.8.3
GETTING BACK TO THE INITIAL SCREEN
To get back to the initial screen from a Menu
1.
selection screen, press the [Mode] button" at
the key pad.
Uni-3 User's Manual
The "Clock Check" screen is displayed.
2.
Check that displayed date and time agree
with the current date and time, and press the
[ENTER] button on the key pad to proceed to
the next step.
Note: Refer to the "Date/Time" menu in Adjustment
Mode when changing date or time.
The "ZERO" indicator lights up and the
2.
weight value becomes zero.
The initial screen is displayed.
2.
Note: The contents of the initial screen may differ
depending on the settings on your machine.
Chapter 1: BEFORE USE
1-11
Need help?
Do you have a question about the UNI-3 and is the answer not in the manual?