Table of Contents
Advertisement
Chapter 1: BEFORE USE
1.6
REMOVING & REPLACING OF WEIGHING PLATTER
1.6.1
REMOVING THE WEIGHING PLATTER
When removing the weighing platter from the main body, lift the front side to pull out the two pins from the two
rubber platter holders and remove the platter by pulling it to disengage the two hooks at the rear side of the
platter.
1.6.2
REPLACING THE WEIGHING PLATTER
When replacing the weighing platter onto the main body, engage the two hooks at the rear side of the platter
and lower the platter so that the two pins on the bottom of the platter are inserted into holes of the rubber
platter holders.
1-8
Uni-3 User's Manual
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the UNI-3 and is the answer not in the manual?