Chapter 1 Workflow - Fujitsu ETERNUS DX Configuration Manual

Chapter 1
Workflow
This chapter describes how to connect the ETERNUS DX storage systems to a server. The workflow is shown
below.
Required Documents
"Server Support Matrix"
•
• "Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETERNUS DX to
be connected
• "ETERNUS Web GUI User's Guide"
Workflow
Setting Up the ETERNUS DX
Set up the ETERNUS DX using ETERNUS Web GUI.
"Chapter 4 Setting Up the ETERNUS DX" (page 17)
•
• Checking the setup and maintenance operations
"ETERNUS Web GUI User's Guide"
-
Setting up the ETERNUS DX
•
"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the
-
ETERNUS DX to be connected
Setting Up the SAS Switches
Set up the SAS switch.
• "Chapter 5 Setting Up the SAS Switches" (page 18)
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows
Copyright 2020 FUJITSU LIMITED
6
®
P3AM-3442-18ENZ0