Chapter 1 Workflow - Fujitsu ETERNUS AF Configuration Manual

Chapter 1
Workflow
Which documents need to be referred to varies with the connection environment. Refer to the workflow that
follows to determine which documents are required.
Required Documents
• "Server Support Matrix"
"Server Support Matrix for FC-SWITCH"
•
"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETERNUS AF/DX
•
to be connected
"Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings"
•
"ETERNUS Web GUI User's Guide"
•
Manuals supplied with the server, Fibre Channel card, Fibre Channel card driver, and multipath driver
•
Workflow
Setting Up the ETERNUS AF/DX
Set the various parameters required to operate the ETERNUS AF/DX. Also, check the WWN of the Fibre
Channel card for the server that is required to set the ETERNUS AF/DX.
"Chapter 4 Checking the Server Information" (page 13)
•
"Chapter 5 Setting Up the ETERNUS AF/DX" (page 15)
•
• Checking the setup and maintenance operations
"ETERNUS Web GUI User's Guide"
-
Setting up the ETERNUS AF/DX
•
"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETER-
-
NUS AF/DX to be connected
Setting Up the Fibre Channel Switches
If a Fibre Channel switch is to be used, set it up now.
• "Chapter 6 Setting Up the Fibre Channel Switches" (page 16)
Checking the Fibre Channel switch connection requirements
•
"Server Support Matrix for FC-SWITCH"
-
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for HP-UX
6
Copyright 2020 FUJITSU LIMITED
P3AM-3772-22ENZ0