Chapter 1 Workflow - Fujitsu ETERNUS4000' ETERNUS8000 Server Connection Manual

Chapter 1
This manual is used when performing the setup procedures described in the "Setting Up the
ETERNUS Disk storage systems" section of the "ETERNUS Disk storage systems Server Con-
nection Guide (iSCSI)" for each OS.
Workflow
P3AM-4172-02ENZ0 Server Connection Guide (iSCSI) ETERNUS Disk Storage System Settings
Workflow
Set the CA Parameters
Set the to-server connection type.
Refer
-
"2.1.1 Setting the To-server Connection Type (Setting the CA Parameters)" (page 11)
Set the Host Responses
Set the host responses to match the connection configuration.
Refer
-
"2.1.2 Setting the Host Responses" (page 12)
Set the Affinity Groups
Set the server accessible LUN groups.
Refer
-
"2.1.4 Setting the Server Accessible LUN Groups (Setting Affinity Groups)" (page 15)
9
Copyright 2010 FUJITSU LIMITED