Operation; Other Symbols In This Documentation; Units Of Measurement; Safety - STIEBEL ELTRON SBB 600 WP SOL Operation And Installation

OPERATION

SAfETY

1.2

Other symbols in this documentation

Note
General information is identified by the symbol shown
on the left.
f Read these texts carefully. f
Symbol Meaning
Material losses
!
(appliance, consequential, environment)
Appliance disposal
f This symbol indicates that you have to do something. The ac- f
tion you need to take is described step by step.
1.3

Units of measurement

Note
All measurements are given in mm unless stated oth-
erwise.
WWW.STIEBEL-ELTRON.COM
2. Safety
2.1

Intended use

The appliance is intended for heating and storing domestic hot
water when operating a heat pump with a higher or a high out-
put. May be combined with heat provided by solar collectors.
Both indirect coils can be linked in series for the highest possible
transfer rate.
Suitable flanged and threaded immersion heaters can be fitted
by contractors.
Any other use beyond that described shall be deemed inappropri-
ate. Observation of these instructions and of instructions for any
accessories used is also part of the correct use of this appliance.
2.2

General safety instructions

WARNING Burns
There is a risk of scalding at outlet temperatures in ex-
cess of 43 °C.
WARNING Injury
!
Where children or persons with limited physical, sensory
or mental abilities are allowed to operate this appliance,
ensure that this will only happen under supervision or
after appropriate instruction by a person responsible
for their safety.
Children should be supervised to ensure that they never
play with the appliance!
Note
The appliance is under pressure.
During the heat-up process, expansion water will drip
from the safety valve. If water continues to drip when
the heat-up process is completed, please inform your
qualified contractor.
3.

Appliance description

The thermal energy in the heating water from the heat pump or
the solar collectors is transferred to the domestic hot water by two
twin pipe indirect coils.
The internal steel cylinder is coated in special directly applied
®
"anticor " enamel and is equipped with a thermometer and a
signal anode. The anode with consumption indicator protects the
internal cylinder from corrosion.
SBB 600-1000 WP SOL | 15