Operation; General Information; Document Information; Key To Symbols - STIEBEL ELTRON PSH 15 mini ID Operation And Installation Manual

OPERATION

GENERAL INFORMATION

1. General information
1.1

Document information

The chapter Operation is intended for the equipment user and the
heating contractor.
The chapter Installation is intended for the heating contractor.
Please read
Read these instructions carefully before using the
appliance and retain them for future reference. If the
appliance is passed on to a third party, please hand these
instructions to the new user.
1.2

Key to symbols

Symbols in this documentation
In these instructions you will come across symbols and highlights.
These have the following meaning:
Risk of injury
Danger of electrocution!
Risk of scalding or burning
Possible damage
!
Information concerning damage to the appliance,
environmental damage or material losses.
Please read
Text next to this symbol is particularly important.
» These passages and the "»" symbol indicate that you have to
do something. The action you need to take is described step
by step.
Symbols on the appliance
Disposal
Appliances with this marking are not suitable for general
waste disposal, and should therefore be disposed of
separately.
Units of measurement
All measurements are given in mm unless stated otherwise.
WWW.STIEBEL-ELTRON.COM
2.

Safety

2.1

Intended use

This sealed (pressure tested) water heater is exclusively designed
for heating domestic hot water. You can equip the appliance with
one or more draw-off points.
Any other use beyond that described shall be deemed inappropriate.
Observation of these instructions is also part of the correct use of
this appliance. Any modifications or conversions to the appliance
void all warranty rights.
2.2

Safety information

Risk of scalding
The fittings can reach temperatures above 43 °C.
Risk of injury
Where children or persons with limited physical,
sensory or mental capabilities are allowed to control
this appliance, ensure that this will only happen under
supervision or after appropriate instruction by a person
responsible for their safety.
Children must be supervised to ensure that they never
play with the appliance.
Possible water damage
!
Expansion water could result in water damage if the
blow-off line of the safety valve is sealed off. Therefore
never close the blow-off line.
2.3

CE designation

The CE designation shows that the appliance meets all essential
requirements:
- Electromagnetic Compatibility Directive
- Low Voltage Directive
2.4

Test symbols

See type plate on the appliance.
3.

Appliance description

The appliance constantly maintains the water content at the
preselected temperature.
The DHW outlet temperature can be infinitely adjusted at the
temperature selector. The heating load starts automatically as
soon as the appliance temperature falls below the selected value.
The appliance is under mains water pressure.
The volume of water expands as the water heats up.
During this process, expansion water drains through the
safety valve. This is a necessary and normal process.
PSH MINI ID | 3