Unify OpenScape Cordless IP V2 Administrator Documentation page 96

Using handset connected to a BSIP2 base
Conversation with three participants
13.3.2 Call swapping
Switching between two calls. The other call is placed on hold.
 During an external call, dial the number of a second participant (consultation call) or accept a waiting caller . . .
the display shows the numbers and/or names of both call participants
 Use the control key
Ending a currently active call
 Options
End active call
or
 Press the End call key
13.3.3 Conference
Speaking to both participants at the same time.
 During an external call, dial the number of a second participant (consultation call) or accept a waiting caller . . .
then
Initiate conference call:
 Conf. all callers can hear one another and hold a conversation with one another
. . .
Return to call swapping:
 End Conf.
You will be reconnected to the participant with whom the conference call was initiated
. . .
End call with both participants:
 Press the End call key
Each of the participants can end their participation in the conference call by pressing the End call key
ing up.
13.3.4 Call transfer
Connecting an external call with a second external participant.
 Use the display key Ext. Call to establish an external consultation call
second participant . . . the active call is placed on hold . . . the second participant is called
key (during a conversation or before the second participant has answered) . . . the call is transferred
Call transfer options must be set correctly for the PBX/provider ( p. 44).
96
to switch back and forth between participants
OK the connection to the other caller is reactivated
. . .
. . . a recall to the first participant is initiated
. . . use
P31003C1020M1000276A9, 01/2018
OpenScape Cordless IP V2, Administrator Documentation
or hang-
to enter the number of the
press the End call